User manual KOFAX VRS4

[. . . ] User's Manual 10300467-000 Revision A Copyright Copyright © 2005 Kofax Image Products, Inc. The information contained in this document is the property of Kofax Image Products, Inc. Neither receipt nor possession hereof confers or transfers any right to reproduce or disclose any part of the contents hereof, without the prior written consent of Kofax Image Products, Inc. No patent liability is assumed, however, with respect to the use of the information contained herein. [. . . ] VRS Profile Selection List 2 Do one of the following: · From the list of profiles, select the profile that you want to use. · Press the function key associated with the profile that you want to use. The profile selection stays in effect until you change it again. To change the active profile from the VRS taskbar menu 1 2 From the VRS taskbar menu, select the Profile command. When the Profiles submenu opens, select the name of the profile you want to use. The profile selection stays in effect until you change it again. VRS User's Manual 57 Chapter 3 Updating a Profile If desired, you can update and save the settings associated with an existing profile. To update a profile 1 2 3 From the VRS Interactive Viewer toolbar, select a profile name. From the VRS Adjustment Controls, update the settings associated with the currently selected profile. - or 1 2 3 4 From the VRS Adjustment Controls, update the settings associated with the currently selected profile. From the VRS Interactive Viewer, select Profile | Organize Profiles. The Organize Profiles dialog box will display. Make sure that the appropriate profile is selected from the profile list and then click Save. Click Close to exit the Organize Profiles dialog box. Removing a Profile You can use the Organize Profiles dialog box to delete a profile. If desired, multiple profiles can be deleted at once. We recommend that you do not remove the "Default settings" profile, because it can be restored only by reinstalling VRS or by using the Restore Default Values utility. For more information, refer to VRS Restore Default Values Utility on page 107. To remove a profile 1 2 3 4 5 From the VRS Interactive Viewer, select the Profile | Organize. The Organize Profiles dialog box will display. From the profiles list, select the profile you want to remove. If desired, you can select multiple profiles for removal. If the deleted profile was the last profile in use, select another profile from the list and then click Load to make it active. Click Close to exit the Organize Profiles dialog box. 58 VRS User's Manual Operating VRS Previewing Images If desired, you can use the preview process to scan a sample image to ensure that it meets your quality requirements and to validate the settings in the current profile. If necessary, you can make adjustments to the profile. [. . . ] Left Offset to Center of Patch Code The Left Offset to Center of Patch Code is a value you select from the left edge of the page that defines a point near the center of the patch code. The offset value allows the patch code detection feature to quickly locate the patch code on the page. This offset can be any value in inches between 0 and the maximum page width. A value of 0 specifies searching anywhere in the horizontal direction for a patch code. [. . . ]