User manual KOMPERNASS BIFINETT KH 1134 KETTLE

[. . . ] Ensure that the appliance, the power cable and the power plug are NEVER submersed in water or other fluids. Voltage: 220 - 240 V ~ / 50 Hz Power consumption: 2500 - 3000 W In older electrical installations, the building fuse (12A) may be triggered due to the high power consumption. Always heat water with a closed lid q, otherwise the automatic cut-out mechanism doesn't work. Boiling water can then spray out over the edge. [. . . ] Press the ON/OFF switch e down, until it snaps in. The left end of the keep warm range indicates the lower temperature. The right end of the keep warm range indicates the higher temperature. (The water does not start boiling in the keep warm range!After reaching the desired temperature, the appliance switches off the heating process. The ON/OFF switch e and the operating lights r remain switched on. Because the device is equipped with a heat maintenance function, the device automatically begins reheating as soon as the water temperature falls below the set temperature. the appliance heats until the desired temperature is reached. Make sure that the appliance does not automatically switch on to the keep warm function. Therefore, do not leave the appliance unsupervised! â· As soon as the kettle u is lifted from the base t, the ON/OFF switch e jumps out and the operating lights r switch off. â· In order to halt the heating process, push the ON/OFF switch e up again. The operating light r goes out then as well. Avoid setting the temperature regulator y in the transition range, as the water can start boiling on account of varying filling levels. there are no operating elements inside. An open housing can create the risk of a life-threatening electrical shock. Never submerse any parts of the device in water or other liquids!This can create the risk of a life-threatening electrical shock if residual liquid comes into contact with powered components. First pull the power plug out of the power socket and let the device cool completely. â· Clean the exterior surfaces and the power cord with a slighly damp cloth. Always dry the device well before using it again. â· Never use any cleansers, abbrasive substances or solvents. [. . . ] The warranty covers only claims for material and maufacturing defects, not for wearing parts or for damage to fragile components. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. [. . . ]