User manual KOMPERNASS EBENCH KH 6777 DVD-PLAYER

[. . . ] KH DVD Player Operating Instructions IB_KH6777_EN 1 23. 09. 2003, 0:56 Uhr The eBench KH 6777 DVD Player incorporates a technology for copyright protection that is protected by process claims of certain US patents and/or other intellectual ownership rights of the Macrovision Corporation and other Copyright owners. The use of this technology for copyright protection must be approved by Macrovision Corporation and is exclusively intended for non-commercial use in the private area; all other uses require the explicit approval of the Macrovision Corporation. Reverse engineering and disassembly are explicitly prohibited. Produced under the license of Dolby Laboratories, Inc. [. . . ] Playback of the selected chapter now commences automatically. KH 6777 IB_KH6777_EN 32 23. 09. 2003, 0:56 Uhr Playing audio-CDs KH 6777 IB_KH6777_EN 33 23. 09. 2003, 0:56 Uhr 14. Playing audio-CDs Proceed in the following manner to play audio-CDs on the DVD Player . . . 1 Switch on the television to which the DVD Player is connected. 2 Ensure that the DVD Player has been switched on and is ready for operation. If the television, the DVD Player and other units that may be connected (e. g. an audio unit) , are all switched on and operational, "eBench" and the "DVD-Video" logo will appear on the television screen: 6 The contents of the audio-CD will then be loaded; this will take several seconds. "Load" will flash on the display on the front of the DVD Player, and "Loading" will be displayed on the television screen. 7 As soon as the contents of the inserted audio-CD has been loaded, the display on the front of the DVD Player will briefly indicate the following . . . · · The total number of titles on the loaded audio-CD The total playing time of the titles on the loaded audioCD IB_KH6777_EN CD 8 Audio-CD playback then commences automatically. The following is faded in on the television screen . . . 1 2 3 4 "NoDisc" will appear on the television screen and on the display on the front of the DVD Player if there is no disc in the disc drawer of the DVD Player. 1 "CD" 2 The symbols and for playback mode 3 The number of the currently played title 4 Time played hitherto in hours, minutes and seconds 3 Open the disc draw on the front of the DVD Player by pressing the "Open/Close" button once on the front panel of the DVD Player, or on the remote control. "Open" will then appear on the display on the front of the DVD Player and on the television screen. . Functions while playing an audio-CD The following DVD Player functions can be used while an audio-CD is being played . . . Stopping playback (Pause) Proceed in the following manner to stop a title on the loaded audio-CD . . . 4 Place an audio-CD, label facing upwards, in the disc drawer. 5 Press once again the "Open/Close" button on the front of the DVD Player or on the remote control to close the disc drawer. "Close" will then appear on the display on the front of the DVD Player and on the television screen while the disc drawer is closing. 1 Press once the "Pause/Step" button on the front of the DVD Player or on the remote control while the title is being played. " " will flash on the display on the front of the DVD Player, and " " will be displayed on the television screen. 2 Press the "Play" button once to continue playback of the title. KH 6777 34 23. 09. 2003, 0:56 Uhr Ending playback (Stop) To terminate playback of a title on the loaded audio-CD, press the "Stop" button on the front of the DVD Player or on the remote control once. Direct title selection Instead of the "Skip Forward" and "Skip Back" buttons, titles can be directly selected on the audio-CD that is being played with the following input procedures: . . . with Resume function If playback of a title on the loaded audio-CD has been terminated by pressing the "Stop" button once, then the DVD Player will automatically store the point at which playback was terminated ("Resume" function"). The television screen will display "Stop [Play to Continue]". As soon as the "Play" button on the front of the DVD Player or on the remote control is pressed again, playback of the title will be resumed from the point it was stopped. Entering the title with the numeral buttons Proceed as follows for direct title selection by entering the title number with the numeral buttons . . . 1 Press during title playback, or when playback has been stopped or terminated, the numeral buttons on the remote control that are equivalent to the title number ­ e. g. button "3" for the third title, or consecutively the buttons "1" and "0" for the tenth title. The entered numbers are indicated on the television screen. [. . . ] Consequently, only 30 full pictures or frames (60 fields) can be displayed per second. This method is known as the "Interlace" format. KH 6777 IB_KH6777_EN 62 23. 09. 2003, 0:57 Uhr This contrasts with the "Progressive Scan" format where all lines are shown each time, i. e. This increases the over-all quality of the picture so that still pictures and text appear to be significantly sharper. What are PAL, NTSC and SECAM? PAL PAL is the abbreviation of "Phase Alternation Line". PAL is the customary and most wide spread colour television standard in central and western Europe (with the exception of France; see "SECAM"). [. . . ]