User manual KOMPERNASS FLORABEST KH 4234 HOSE TROLLEY

[. . . ] Cordless branch cutter 1 Starting lock 2 Charging socket 3 Handle 4 On / Off switch 5 Ventilation grate 6 Screw 7 Saw blade 8 Branch holder 9 Saw blade cover 10 Edge guide Battery charger (see Fig. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. Failure to observe the instructions and advice given below may result in electric shock, fire and / or serious injury. 6 - KH 3127: Rated voltage: 9, 6 V Rated speed: 860 rpm Sound pressure level: 72, 4 dB (A) Sound power level: 83, 4 dB (A) Integrated NI-CD rechargeable battery: Rated capacity: 1. [. . . ] By using the right electrical power tool for the job you will work more safely and achieve a better result. B) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. damaged tools , mains cables or mains plugs pose a danger to life as a result of electric shock. M aintenance and cleaning must only be carried out when the tool is switched off and the battery charger is disconnected from the mains power. N ever under any circumstances charge the integrated rechargeable battery with the battery charger if damaged. o nly use the original battery charger to charge the integrated battery. B efore connecting the battery charger to the mains power, make sure that the mains current is 230 V ~ 50 Hz and is equipped with a 16 A fuse in accordance with requirements. How to avoid injury: Use the following safety gear when operating the tool: Wear safety goggles, worker safety boots and protective gloves. The saw blade 7 runs on after the tool has been switched off!Avoid any contact with the rotating saw blade 7 . J nly remove workpieces when the saw blade O has come to a complete standstill. J revent the saw blade 7 from coming into P contact and / or colliding with stones, metal, or similar materials. The saw blade 7 may otherwise be damaged. [. . . ] Always cut in such a way that the guiding edge 10 is resting on the branch (see Fig. Do not dispose of electrical power tools with the household rubbish!Change the saw blade 7 as soon as its toothing becomes blunt. J j j j j Unscrew the screw 6 using a Phillips screw driver. [. . . ]