User manual KOMPERNASS KH 3229 MEASURING TAPE

[. . . ] KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www. kompernass. com ID-Nr. : KH3229-09/06-V2 Measuring Tape with Marking Laser KH 3229 Operating instructions ¸ µ Measuring Tape with Marking Laser Safety instructions Intended Usage Items supplied Description of the appliance Technical data Inserting the batteries Using the measuring tape Using the laser Cleaning and Care Disposal Service Importer 4 5 6 6 7 7 8 10 15 15 17 18 -3- Measuring Tape with Marking Laser KH3229 Safety instructions Injury Hazard!· Do not allow the measuring tape to rewind itself without control. · NEVER leave children unsupervised with the measuring tape. [. . . ] Never allow the measuring tape to rewind itself without control. · When you want to rewind the measuring tape , hold the end firmly and slide the tape lock upwards. · Now permit the measuring tape to rewind slowly, without letting go of it. -9- Using the laser Injury Hazard!· NEVER direct the laser beam at people or animals. · Do NOT direct the laser beam at strongly reflective material. Reflected laser beams are also dangerous. Using the laser with a tripod The tripod is not supplied. You can use a standard commercial tripod with a 3/8" thread (for example, a camera tripod). - 10 - · Screw the measuring tape onto the tripod with the tripod thread . · Adjust the tripod to the required height. · Align the Measuring Tape with Marking Laser such that the bubbles in the spirit levels and lie exactly between the markings. · Press the On/Off switch ¸ to activate the laser. · Turn the covering flap all the way to the left or right, dependant on whether you wish to project a vertical or a horizontal line. - 11 - · Direct the laser line onto the desired wall. If you direct the laser beam in horizontal adjustment into a corner, the laser beams on both walls and in the corner are at exactly the same distance from the floor (see Fig. 2: 3 Point measurement). Fig. 1: Horizontal measurement - 12 - Fig. 3: Vertical measurement Using the laser without a tripod · Place the Measuring Tape with Marking Laser on the levellest possible surface. 1m 1m - 13 - 1m · Press the On/Off switch ¸ to activate the laser. · Adjust the Measuring Tape with Marking Laser, with the assistance of the foot screws , such that the bubbles in the spirit levels and lie exactly between the markings. [. . . ] This obligation is intended to ensure that batteries are disposed of in an environmentally safe fashion. Only dispose of batteries when they are fully discharged. - 16 - Service DES Ltd Units 14-15 Bilston Industrial Estate Oxford Street Bilston WV14 7EG Tel. :0870/787-6177 Fax:0870/787-6168 e-mail: support. uk@kompernass. com Kompernass Service Ireland c/o Irish Connection 41 Harbour view Howth Co. Dublin Tel: 087-99 62 077 Fax:18398056 e-mail: support. ie@kompernass. com - 17 - Importer KOMPERNASS GMBH BURGSTRASSE 21 D-44867 BOCHUM www. kompernass. com - 18 - [. . . ]