User manual KOMPERNASS KH 4225 METAL CLAMP LAMP

[. . . ] For this reason the appliance should be placed in a position where unhindered access to the power socket is assured at all times, so that in an emergency the plug can be quickly removed. To eliminate the risk of fire you should completely disconnect the plug from the wall socket if the appliance is not going to be used for an extended period, for example, during holidays. This appliance is intended for use as illumination for living areas in domestic households and only in dry rooms. This appliance is not intended for use as sole illumination, for industrial or commercial applications or for use in occupational areas. [. . . ] With areas on which the light falls directly, a distance of 50 cm must be maintained. Do not place the lamp at locations where, should it inadvertently fall off, it would land on easily inflammable materials, e. Soft furnishings, beds, waste paper baskets etc. Place the lamp where it cannot be knocked off or damaged by falling objects. Arrange for the appliance to be checked and, if necessary, repaired by qualified technicians. Before changing the light bulb, ALWAYS wait for the bulb and the bulb holder to cool down. Otherwise you run the risk of being burnt on the hot elements. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. Check to ensure that the plug has been removed from the wall socket. If you do not, you could receive a potentially fatal electric shock!If the lamp has been in use, first allow it to cool down completely. This avoids the potential risk of being burnt. > Turn the bulb r anti-clockwise until it can be removed from the bulb holder. > Insert the new light bulb r into the bulb holder w and turn it clockwise until it is firmly fitted. First put the components together completely before operating the lamp. > First take all appliance components from the packaging and remove all packing foil and tape. > Screw the lampshade e onto the bulb holder w. > Carefully screw the bulb r clockwise into the bulbholder w. > Unwrap the power cable u and insert the plug into a properly installed household mains power socket. > Secure the lamp with the clamp t at a location that complies with the details given in the safety instructions. The light bulb r will heat up quickly - after the lamp has been switched off do not touch the bulb until it has cooled down, otherwise you will be burnt. [. . . ] The warranty covers only claims for material and maufacturing defects, not for wearing parts or for damage to fragile components, e. This appliance is intended solely for domestic, not commercial, use. In the event of misuse and improper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void. Your statutory rights are not restricted in any way by this warranty. [. . . ]