User manual KOMPERNASS KH 4227 PLUG-IN LIGHT

[. . . ] Ensure that the appliance can never become wet or moist when in use or that it could be damaged in any way. Notice regarding separation from mains-power: To completely disconnect the appliance from mains power, the appliance MUST be removed from the power socket. For this reason, the applaince should be used at a location where unobstructed access to the mains power socket is assured at all times, so that you are able to immediately withdraw the mains power plug in the event of an emergency. To eliminate the risk of fire you should completely disconnect the plug from the mains power socket if the appliance is not going to be used for an extended period, for example, during holidays. [. . . ] Children should be supervised to ensure that they do not play with the appliance. Assembling the lamp and taking it into use we have preassembled parts of the lamp. > First take all appliance components from the packaging and remove all packing foil and tape. > Insert the prongs of the bulb e carefully into the opening of the bayonet connector in the bulbholder w and then turn the bulb through ¼ rotation to the right. > Insert the lamp with its plug t into a properly installed and earthed mains power socket at a location that complies with the details given in the safety instructions. Arrange for the appliance to be checked and, if necessary, repaired by qualified technicians. Before changing the light bulb, ALWAYS wait for the bulb and the bulb holder to cool down. Otherwise you run the risk of being burnt on the hot elements. The light bulb e will heat up quickly - after the lamp has been switched off do not touch the bulb until it has cooled down, otherwise you will be burnt. Risk of potentially fatal electrical shock: Check to ensure that the appliance has been removed from the wall socket. If the lamp has been in use, first allow it to cool down completely. This avoids the potential risk of being burnt. NEVER submerse the appliance or its components in water or other fluids! Do not allow any liquids to penetrate into the appliance. Cleaning the appliance: Clean the appliance with a dry or lightly moistened cloth only. Do not use abrasive or aggressive cleaning agents, these could damage the upper surfaces. Check to ensure that the appliance has been removed from the wall socket. If you do not, you could receive a potentially fatal electric shock!If the lamp has been in use, first allow it to cool down completely. This avoids the potential risk of being burnt. [. . . ] This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. [. . . ]