User manual KOMPERNASS LERVIA KH 1410 CYCLONE VACUUM CLEANER

[. . . ] · Prevent the appliance from coming into contact with moisture!Otherwise, there is the risk of receiving a fatal electric shock!· Do not attempt to vacuum up liquids!If you do, there is the risk of receiving a fatal electric shock! [. . . ] Fit the required tool (see chapter "Changing tools"). Pull the power cable o from the cable storage up to the yellow marking. Should the red marking on the power cable o be visible, rewind the power cable o, by pressing on the foot button for power cable rewind i, back to the yellow marking. Otherwise, the power cable o could break off. Adjust the suction power with the suction power regulator u. Crevice tool 2$: To vacuum dust from difficult to reach locations. Upholstery brush 2%: To vacuum dust from upholstery or other fabric surfaces. 2. Switch the machine off at the On/Off switch t. -6- 5. If you are using the floor tool f, adjust the setting for carpet/hard floor d with the selector switch: · Press the carpet/hard floor selector switch d to the rear for hard floor surfaces such as laminates, tiles and PVC etc. · Press the carpet/hard floor selector switch d to the front for carpeted surfaces, such as long or short pile carpets and rugs etc. Pull the vacuum cleaner after you like a sledge. When vacuuming, pay heed to the information providet by the floor covering manufacturer. Notice: Should you need to reduce the suction power, e. g. if a curtain is sucked in, open the secondary air regulator 2@. Press the On/Off switch t to switch the vacuum cleaner off. Remove the power plug o from the wall socket. Hold the power plug o firmly and press on the foot button for power cable rewind i. Allow the power cable o to pull itself in slowly. Emptying the dust collector Empty the dust collector h at the latest when the MAX marking is reached or the suction power has noticeably diminished. Before emptying the dust collector h, remove the plug o from the power socket. Press the unlock button w and open the housing lid s. Turn the dust collector h to the side so that it can be lifted out. Hold the dust collector h low over a dustbin and press the dust collector unlock button . Replace the dust collector h into the vacuum cleaner. [. . . ] Replace it only when it is completely dry. Replace the exhaust filter and the grill . Slide both of the lugs of the exhaust filter cover e into the recesses on the vacuum cleaner. Press the exhaust filter cover e to until it audibly engages. Disposal Do not dispose of the appliance in your normal domestic waste. [. . . ]