User manual KOMPERNASS MELINERA KH 4218-4223 3D-ILLUMINATED CHRISTMAS DECORATION

[. . . ] IMMEDIATELY take the rope light out of use should the insulation become damaged. Risk of potentially fatal electrical shock!In the event of damage to the power cable, the appliance must be made unusable and correctly disposed of. ALWAYS first remove the plug from the wall socket before starting to clean the rope light figure. [. . . ] NEVER tie knots in the power cable and do not bind it with other cables. Place the power cable in a position where it cannot be trod on. A damaged power cable can cause a fire or electrical shock. Check the power cable from time to time. Risk of fire!· Do not use the appliance adjacent to hot surfaces. · Do not place any open sources of fire, such as candles, close to the illuminated figure. · When a storm and/or thunderstorm with the risk of lightening threatens, please disconnect the illuminated figure from mains power. · NEVER allow the figure to light up in its packaging, there is a risk of it overheating!· You may only place the illuminated figure on normal fire-retardant surfaces. · Notice regarding power disconnection: To completely disconnect the device from mains power, the plug MUST be removed from the power socket. For this reason the device should be placed in a position where unobstructed access to the power socket is assured at all times, so that in an emergency you will be able to immediately remove the plug. To eliminate the risk of fire, you should disconnect the plug from the power socket if you do not intend to use the device for an extended period, for example, during a holiday. · Do not hang or affix any objects to the illuminated figure. · Ensure that the power cable to the illuminated figure does not pass through areas where lawnmowers, trimmers, shears or similar cutting instruments might be used. -2- Setting up the illuminated Figure Take the Illuminated Figure from its packaging. Remove all transportation fasteners and tapes/foils. Place the Illuminated Figure on a suitable surface. Carefully pull the two wire elements apart, on the Christmas tree figure (KH4222) and the Snowman figure (KH4220), so that the figures can stand alone. If necessary, secure the illuminated figures to the ground with the supplied ground spikes. Connect the Illuminated Figure with a correctly installed 230 V domestic power wall socket. When you wish to turn off the illumination function of the Illuminated Figure, remove the plug from the wall socket. [. . . ] This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase date. Should a claim need to be made under the warranty, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. [. . . ]