User manual KOMPERNASS PARKSIDE KH 3127 PRC 9.6 CORDLESS BRANCH CUTTER

[. . . ] Page 7 Operation Switching on / off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8 Cutting branches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8 Changing the saw blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8 Maintenance and cleaning Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] J Only use the original battery charger to charge the integrated battery. J Avoid damage of any kind to the cable } or the power pack { . Otherwise there is a danger to life as a result of electric shock. J Before connecting the battery charger to the mains power, make sure that the mains current is 230 V ~ 0 Hz and is equipped with a 16 A fuse in accordance with requirements. J Make sure that you do not under any circum stances damage any electricity or telecommunication lines when operating the tool. J In the event of damage please contact the Service Office for your country (see "Warranty and Service" booklet). How to avoid injury: Use the following safety gear when operating the tool: Wear safety goggles, worker safety boots and protective gloves. The saw blade U runs on after the tool has been switched off!Avoid any contact with the rotating saw blade U. J Keep your hands and feet well away from the J rotating saw blade U. J Only remove workpieces when the saw blade has come to a complete standstill. J Prevent the saw blade U from coming into contact and/or colliding with stones, metal, or similar materials. The saw blade U may otherwise be damaged. J Switch the tool off immediately (release the On / Off switch R ): - if you hit any object (e. g. lines / cables or nails) when cutting branches. - if the saw blade U becomes blocked (e. g. J Only change the saw blade U when it is at a complete standstill and the tool is switched off J Never under any circumstances connect the ca ble } to the tool during cutting operation. J Keep people out of the operating area of the tool. J Keep out of the area in which a cut and falling branch could hit. Estimate the fall of the cut branch and make sure you keep out of the area of impact. J Do not cover the battery charger with any ob jects. This could cause a build-up of heat generated during operation of the battery charger. Proper procedure and handling: J Do not overload the tool during operation to such an extent that it comes to a standstill. [. . . ] Always position the cut so that edge guide P is lying on the branch. 8 GB / IE Maintance and cleaning / Disposal / Information L Cleaning L Declaration of conformity j Remove any dirt (e. g. wood shavings / sawdust and plant debris) from the tool using a dry cloth. j Clean the saw blade U thoroughly. We, Kompernaß GmbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product conforms to the following EU Directives: Machinery Directive (89/392/EC), (91/368/EC), (93/44/EC) EC Low-Voltage Directive (73/23/EEC) Electromagnetic Compatibility (89/336/EEC, 92/31/EEC) Product designation: Parkside Cordless Branch Cutter PRC 9. 6 / KH 3127 L Disposal The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. [. . . ]