User manual KOMPERNASS PARKSIDE PDS 200-KH 3153 DUBBELBANKSLIP

[. . . ] This does not affect your legal rights. 4 IMPORTANT SAFETY ADVICE Ensure that you observe the following safety instructions specifically for this equipment and in addition that you read the advice in the accompanying booklet called "Safety advice" before using the equipment for the first time. Not following the safety instructions and advice can lead to accidents, electric shock, injuries, risks to health, or burns. This bench grinder is intended to be used exclusively for dry grinding. Materials dangerous to health, such as asbestos are not to be abraded. [. . . ] Bring the workpiece support close up to grinding wheel until the wheel just not longer moves. Retighten the adjustment screw ² and check using your hand that the grinding wheel movement is true and free. If the grinding wheel is worn so much that the above clearance can no longer be achieved even after adjustment of the workpiece support ¿/¶ or the eye shield mount », then the grinding wheel must be changed. í COMMISSIONING Ensure that the equipment is switched off and that the ON/ OFF switch ´ is in the "0" position. The voltage must agree with that shown on the equipment rating plate (equipment shown as 230 V can also be connected to 220 V). ON / OFF switch ´ in position "1" = equipment runs at a constant speed ON / OFF switch ´ in position "0" = equipment is switched off 5 í USE To grind metal tools or metal items, place the workpiece on the workpiece support ¿/¶ and slowly bring it close to the grinding wheel . Carefully press the workpiece against the grinding wheel . Too much pressure can lead to overloading of the bench grinder. Grinding should be carried out only on the circumference of the grinding wheels. CHANGING A GRINDING WHEEL Always make sure that the mains plug is out of the socket before doing any work on the equipment and when it is out of use. You must only use grinding wheels on which the manufacturer's information, the type of adhesive, dimensions and permitted speed agree with the technical information specified for this bench grinder. Do not use any damaged or distorted grinding wheels. If you install new grinding wheels carryout a ringing test before use. Grinding wheels in good condition give a clear ringing noise when struck lightly with a plastic hammer. Remove the wheel guard cover º and the eye shield mount . Release the nut ¸ to remove the outer flange ¹. Now change the grinding wheel and reassemble all the components in the reverse order. Take note that the left-hand side of the bench grinder has a left-hand thread and the right-hand side has a right-hand thread. This ensures that the nuts can only be screwed off in the direction of rotation of the spindle. WARNING ! 01. Do not interchange the flanges when attaching the grinding wheels (see Fig. 2). Use only the clamping flange supplied to mount the grinding wheels. Central fixing holes in grinding wheels are not to be redrilled. [. . . ] 21, D-44867 Bochum, Germany, hereby declare that this product conforms with the following EC regulations: EC machine guideline: EC low voltage regulations: Electromagnetic compatibility: Manufacturer: Model type: Description: 98/37 EEC 73/23 EEC (with change EC directive 93/68 EEC) 89/336 EEC (with change EC directive 93/68 EEC) PARKSIDE PDS 200 BENCH GRINDING MACHINE Bochum, 31. 07. 2003 Hans Kompernaß - Managing Director - 7 WARRANTY This piece of equipment is covered by a 36-month warranty as of the date of purchase. The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase (if available) to the closest service address. Damage caused due to improper handling as well as regular wear of the parts are not covered by this warranty. [. . . ]