User manual KOMPERNASS PARKSIDE PPHSS 730-3128 PRECISION PENDULUM-ACTION JIGSAW

[. . . ] B) L Delivery scope Proper use This tool is suitable for making straight and curved cuts and mitre cuts on squared workpieces made of plastic, wood and metal. The tool is approved solely for private use in dry areas. Please observe the notes relating to the types of saw blade. Any other use or modification of the tool constitutes improper use and poses a serious risk of accident. [. . . ] Damage to a gas line can cause explosion. Damage to a water pipe causes damage to property and can cause electric shocks. Only touch the power tool on the insulated handle if you are working where the tool can hit concealed electric power lines or the tool's own mains cable during operation. Contact with a live cable makes the metal parts of the power tool GB/IE 7 L Safety Important safety instructions specific to the tool J Keep the tool out of the reach of children. Store the tool in a dry, enclosed space, out of the reach of children. To avoid danger to life from electric shock: J Check the condition of the tool, the mains cable and the plug regularly. Do not use tools if any parts are damaged. Repair or replacement must be carried out by the Service Office or an electrician only. Damaged tools, mains cables or mains plugs pose a danger to life from electric shock. Repairs must only be carried out by an expert or the responsible Service Office. Do not use the tool if it is damp or in damp conditions. When working outdoors, connect the tool via a residual current circuit breaker (RCCB) with a maximum 30 mA breaking current. Only use an extension cable that is approved for outdoor use. Do not use the tool when it is raining or in wet conditions. Always lead the mains cable T to the rear away from the tool. To avoid danger to life and risk of injury: J Make sure that the tool is only operated by persons over 18 years of age in accordance with the operating instructions. J Clamp the workpiece tightly in position (with chucking fixtures or in a vice) or secure it where it is not held in place by its own weight. J J J J J J J J J J J J J J J J J Safety / Initial operation live and causes electric shocks. Saw blade type for PPHSS 715 suitable unsuitable How to work safely: J Never use the tool for any other than its intended purpose and only with original parts / accessories. J Always keep a tight hold on the tool when working. Make sure that you have a secure footing. J Always remove the mains plug from the socket during any breaks from work, before working on the tool (e. g. changing the saw blade) and when the tool is not in use. [. . . ] Switching off j Push the on-off switch W into "0" position. It returns into "0" position. L Operation L Setting the cutting angle j Release the locking screw { with the Allen key i. j Set the cutting angle on the sole plate O using the engraved markings 0° / 1° / 30° / 4° (left / right) for mitre cuts. These values correspond to the indentations for the cutting angle adjustment. The housing has a retention pin o, (see Fig. [. . . ]