User manual KONICA MINOLTA 4508-7782-01 VIEW

[. . . ] User Manual Network Interface Card (NC-6) Contents 1 Welcome 1. 1 1. 2 Trademark Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 About PageScope Light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 2 Getting Ready 2. 1 Selecting the Network Print Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 For Windows 95 (OSR 2. 5)/ Windows 98/ Windows 98 SE/ Windows ME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 For Windows NT 4. 0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 For Windows 2000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 For Windows XP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 For NetWare (NetWare Server/ Windows Client) . . . . . . . . . . . . . . . . . . . . . . . 2-6 Supported Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Checking the Setup Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Peer-to-Peer Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 LPR / PORT 9100 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 IPP Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 NetWare Server/Client (except NDPS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10 NetWare Server/Client (NDPS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10 2. 2 3 4 Checking the Accessories 3. 1 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Connecting the Network Cable 4. 1 4. 2 Types of Cable That Can Be Used. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Connecting the Network Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 5 Assigning an IP Address 5. 1 5. 2 Entering the IP Address From the Control Panel. . . . . . . . . . . . . . . . . . . . . . . 5-1 Assigning an IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 6 7 Printing the Configuration Page Connecting the Computer and Copier 7. 1 Procedures Described in This Chapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 i NC-6 7. 2 7. 2. 1 Setting Up the Network Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Peer-to-Peer Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Windows 95 (OSR 2. 5)/ Windows 98/ Windows 98 SE/ Windows ME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 LPR Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] NC-6 5-1 5 5. 2 Assigning an IP Address Assigning an IP Address The IP address can be assigned using a function on the "NETWORK SETTING" menu. Other functions on the "NETWORK SETTING" menu can be used to specify the subnet mask and default gateway settings. 1 Press the [Utility] key. The first Utility mode screen appears. 2 Use the and keys to select "NETWORK SETTING?". 3 Press the [1] key from the 10-key pad to select "IP ADDRESS". 4 Use the and keys to select "SPECIFY", and press the [Yes] key. Note If "SPECIFY" is selected in this step, "AUTO" can also be selected. If "AUTO" is selected, the IP address, subnet mask, and default gateway setting are automatically assigned by the DHCP server on the network. This means that they do not have to be assigned manually, as is the case when "SPECIFY" is selected. However, please note the following points when using "AUTO" to assign the IP address. 5-2 NC-6 Assigning an IP Address 5 Check with your network administrator to determine if there is a DHCP server available on the network. (If there is, a special IP address will be assigned by the AutoIP function. However, the copier will not be able to communicate with other devices on the network that have had ordinary IP addresses assigned to them. For details about the AutoIP function, refer to "Product Specifications" on page 9-1. ) Always select "SPECIFY" when there is no DHCP server available. When "AUTO" is selected to assign the IP address, the IP address may sometimes be changed automatically. If the IP address and other settings are changed, you may not be able to print to a specified printer on the network due to a communication failure caused by a change in the address. When "AUTO" is selected, we recommend that you set the DHCP server to assign a fixed address to the copier. 5 Use the 10-key pad and the and address. keys to enter the IP Note If an IP address is already entered, it can be overwritten by a new one. The IP address shown in the illustration is only an example. Always check with your network administrator before entering an IP address for the printer. 6 Press the [Yes] key to confirm the setting. The "NETWORK SETTING" menu appears again. Proceed to enter the subnet mask setting. 7 While the "NETWORK SETTING" menu is displayed, press the [2] key in the 10-key pad to select "SUBNET MASK". NC-6 5-3 5 8 Use the 10-key pad and the and keys to enter the subnet mask address. Assigning an IP Address Note The subnet mask address shown in the illustration is only an example. Always check with your network administrator before entering a subnet mask address. 9 Press the [Yes] key to confirm the setting. The "NETWORK SETTING" menu appears again. Proceed to enter the default gateway setting. 10 While the "NETWORK SETTING" menu is displayed, press the [3] key on the 10-key pad to select "GATEWAY". 11 Use the 10-key pad and the and keys to enter the default gateway address. Note The default gateway address shown in the illustration is only an example. Always check with your network administrator before entering a default gateway address. 12 Press the [Yes] key to confirm the setting. The "NETWORK SETTING" menu appears again. Finally, the specified IP address, network mask, and default gateway settings are registered on the copier itself. In order to register these settings, the copier must be restarted by turning it off, then on again. 13 While the "NETWORK SETTING" menu is displayed, press the [No] key or the [Panel Reset] key to select "PLEASE RE-START POWER SUPPLY OFF/ON". 14 Set the power switch on the copier to "O", then "I" to restart the copier. 5-4 NC-6 Printing the Configuration Page 6 6 Printing the Configuration Page Detailed information on the settings can be printed so that the contents of the settings can be easily checked. Note The Configuration Page cannot be printed for copiers that are not equipped with the optional PCL printer controller or fax option. 1 Press the [Status] key on the control panel of the copier. 2 Use the and keys to select "PRINTER REPORT?". 3 Press the [Yes] key. A list of the types of report that can be printed appears. 4 Use the and keys to select "CONFIGURATION PAGE?". 5 Press the [Yes] key. The contents of the settings are printed. NC-6 6-1 6 Printing the Configuration Page 6-2 NC-6 Connecting the Computer and Copier 7 7 Connecting the Computer and Copier This chapter describes how to connect the computer and copier, and the settings required to enable the copier to print jobs received over the network. 7. 1 Procedures Described in This Chapter The connection procedures described in this chapter are as follows: G G Peer-to-Peer Printing Windows 95 (OSR 2. 5)/ Windows 98/ Windows 98 SE/ Windows ME LPR Printing Windows 2000 Windows NT 4. 0 Printing to Port 9100 Windows 2000/ Windows XP IPP Printing Windows 2000/ Windows XP Connecting a Copier to the NetWare Server Setting up NetWare 4. x / 5. x / 6 Print Server Mode Setting up NetWare 4. x / 5. x / 6 Remote Printer Mode Setting up NetWare 5. x / 6 Novell Distributed Print Service (NDPS) Setting up the Windows Computer for the NetWare Client G G G NC-6 7-1 7 7. 2 7. 2. 1 Peer-to-Peer Printing Connecting the Computer and Copier Setting Up the Network Connections Windows 95 (OSR 2. 5)/ Windows 98/ Windows 98 SE/ Windows ME Important Before continuing to set up the network settings, check the following: Check that the computer is set up to use the TCP/IP protocol. Check that the copier is also set up to use the TCP/IP protocol. Check that the printer driver has been installed on the computer. [. . . ] This is used to select various setting items or display information. Displays the details for the item selected from the menu. 8-4 NC-6 Using PageScope Light 8 8. 6 Logging In as an Administrator Some of the settings available in PageScope Light can only be changed by an administrator. These settings are only displayed when you log in to the Administrator mode. Logging In to Administrator Mode 1 Enter the administrator password in the "Admin Password:" box at the left of the screen. 2 Click the [Login] button to log in to the Administrator mode. [. . . ]