User manual KONICA MINOLTA 7812

[. . . ] Konica 7812 Series Setup Guide Installation Checklist: Please cut out this page and use it as a guide when installing your printer. 1st Install the Printer 2nd Make the Computer Connection & Install the Software Windows h Select a Location (see p. 10-11) · Parallel Install (see p. 12) Macintosh ¡ h Complete · Network Install (see pp. 14-15) 3rd Finish the Setup h Set Color Balance (see p. [. . . ] Connect the other end of the Ethernet cable to the network port (4). Turn the printer on and wait for the print server status light to stop blinking. ! In order to open the on-line manuals, you must have your Macintosh set to run . htm extension files under your browser. Create folders in which to store the Konica 7812 Series User's Guide and the Konica Network User's Guide. Place the CD supplied with your printer in your CD-ROM drive. Copy the files from the CD folder Manuals\UserGuid\Html\English to the folder you created for the Konica 7812 Series User's Guide. Copy the readmeMac. htm file from the root directory on the CD supplied with your printer to the folder you created for the Konica 7812 Series User's Guide. Copy the files from the CD folder Manuals\Network\Html\English to the folder you created for the Konica Network User's Guide. !! For more information on the Print Server, see the on-line Konica Network User's Guide. Network: Install the Driver Be sure to switch off antivirus software before installing a printer driver. Turn the printer on, then turn the computer on. Place the CD supplied with the printer in the CD-ROM drive, then double-click the icon that appears on the desktop. Open the MAC folder and double-click the Mac Installer icon, then click Continue. To View the Manuals To view the on-line manuals, go to the folder where you stored the manual, then double-click the start_e. htm file. 13 15 ! USB Install: Macintosh USB: Install the Driver USB Port Connection No USB interface cable is supplied with the printer. Use a USB cable that is compatible with USB specification 1. 1. ! Be sure to switch off antivirus software before installing a printer driver. Turn the printer on, then turn the computer on. Place the CD supplied with the printer in the CD-ROM drive. Double-click the Konica CD icon that appears on the desktop. Double-click the Mac Installer icon, then click Continue. Select Custom Install from the drop-down box. Select the printer model you have, then click Install. When the installation is complete, click Quit. Notes: · Requires Mac OS 9. 04 or higher · Printer operation is not assured if another USB compatible device is connected concurrently with it. · If a USB hub is used, it must be connected directly to the computer. · Depending on the size of the document, if the memory setting for the print monitor is low, you may not be able to print in the background. To correct for this, increase the memory setting for the print monitor. · Depending on the model you have, you may need to install updates to the operating system in order to use USB: e. g. , iMac Update 1. 0, iMac Update 1. 1, iMac Firmware Update, etc. For further information, contact Apple Computers. USB: Create the Desktop Printer Double-click the Apple Extras folder on your local hard drive. Double-click the Apple LaserWriter Software folder. [. . . ] To change the interval: Press MENU repeatedly until SYSTEM CONFIG MENU appears on the display. Press ITEM + repeatedly until POWER SAVE DELAY TIME appears on the display. Press VALUE (+ or -) repeatedly until the desired setting appears on the second line of the display. An Asterisk (*) appears next to the new setting. [. . . ]