User manual KONICA MINOLTA BIZHUB 160 161 TWAIN UM 2.0.0

[. . . ] 160/161 User manual TWAIN Driver . x Contents Contents 1 Introduction 1. 1 1. 2 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Trademark acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 2 3 Setting up PC scanning Connecting to the machine Connecting to the USB port of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 4 Installing the TWAIN driver 4. 1 Installation under Windows XP/Server 2003 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If a warning message appears, click [Next] to complete the installation and restart the computer. 4-4 TWAIN Driver Installing the TWAIN driver 4 4. 2 Installation under Windows 2000 Installing the TWAIN driver under Windows 2000 1 2 3 4 5 6 7 With Windows running, insert the CD-ROM into your computer's CDROM drive. When the machine is ready, connect it to the computer with the USB cable. The "Found New Hardware Wizard" dialog box appears. Select Search for a suitable driver for my device (recommended) in the "Install Hardware Device Drivers" dialog box, and then click [Next]. The "Locate Driver Files" dialog box appears. Select Specify a location, and click [Next]. Click [Browse. . . ] on the next dialog box, browse to "Driver\(language)\2k_XP" on the CD-ROM, and then click [Open]. For example, if you prefer English, browse to: Driver\English\2k_XP 8 9 10 Click [OK], and follow the instructions that appear on the screen until the "Completing the Found New Hardware Wizard" dialog box appears. This completes the installation of the TWAIN driver. The "Found New Hardware Wizard" dialog box appears again. Repeat steps 4 through 9 to install the printer driver. TWAIN Driver 4-5 4 2 Installing the TWAIN driver Note To reinstall the TWAIN driver, connect the machine to the computer with the USB cable, and then perform the installation again as described below. Reinstalling the TWAIN driver (for Windows 2000) 1 2 3 4 5 In the "System Properties" dialog box, click the "Hardware" tab, and then click [Device Manager]. Display the properties for the desired TWAIN device under "Imaging devices" in the "Device Manager" dialog box, click the "Driver" tab, and then click [Update Driver]. Select Display a list of the known drivers for this device so that I can choose a specific driver, and then click [Next]. Specify the path to the folder containing the driver to be reinstalled. If a warning message appears, click [Next] to complete the installation and restart the computer. 4-6 TWAIN Driver Installing the TWAIN driver 4 4. 3 Installation under Windows Me/98 SE 2 Note When using Windows 98 SE, the USB-compatible device driver must be installed before the TWAIN driver is installed. Click [Next] after selecting the following in the dialog box that appears, and then click [CD-ROM drive]. Display a list of all the drivers in a specific location, so you can select the driver you want. Click [Finish] to begin installing the TWAIN driver. Installing the TWAIN driver under Windows Me/98 SE 1 2 3 With Windows running, insert the CD-ROM into your computer's CDROM drive. [. . . ] If "Custom" was selected in the Original Size pull-down list, the scanning area can be redefined. In addition, when the pointer changes to , the scanning area can be moved. TWAIN Driver 6-5 6 6. 2 Manual options Common settings To enter the enhanced settings, select Manual in the scanning mode. 1 2 3 4 5 6 7 8 No. 1 2 3 4 5 6 Items Rotation Default Brightness/Contrast Sharp Curve Level Settings None (default setting), Right 90, Left 90 Click [Default] to restore all the enhanced settings to their default values. -100 to 100% -2 to 3 For details, refer to "Sharp" on page 6-7. [. . . ]