User manual KONICA MINOLTA BIZHUB 210

[. . . ] 162/210 User Manual x Contents Contents 1 Introduction 1. 1 1. 2 1. 3 We want you to be a satisfied customer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Trademarks and registered trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Regulation notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 CE Marking (Declaration of conformity) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] % Make sure that the paper guides are pushed up against the edges of the paper. ? 4-8 bizhub 162/210 Making copies 4 Close the 2nd tray. 5 bizhub 162/210 4-9 4 4. 3 Loading the document Making copies The document can be loaded into the document feeder (optional) or positioned on the original glass. Position the document correctly according to the type of document being copied. Loading documents into the document feeder 7 CAUTION Paper jam in fact of overloaded document feeder. % DF-502: A maximum of 50 document pages can be loaded. % DF-605: A maximum of 80 document pages can be loaded. % Do not load so many pages that the top of the stack is higher than the , mark. % Be sure to adjust the document guides so that they are against the edges of the document, otherwise the document may not be fed in straight. 1 Slide out the document guide plates. 2 Load the document pages to be copied face up into the document feeder. 4-10 bizhub 162/210 Making copies 4 Adjust the document guide plates to fit the size of the document. For details, refer to "Making a basic copy" on page 4-3. This will start the copy cycle. 3 4 5 2 Note Be sure to load the document correctly, otherwise the pages may not be fed in straight. bizhub 162/210 4-11 4 Positioning a sheet document on the original glass Making copies Use the following procedure to position plain paper or an original that is not suitable for use in the document feeder. 1 2 Raise the document feeder or original cover. Place the document face down on the original glass. 3 4 5 6 Position the document on the scales above and to the left of the original glass. Gently lower the document feeder or original cover. For details, refer to "Making a basic copy" on page 4-3. This will start the copy cycle. 4-12 bizhub 162/210 Making copies Positioning transparent documents on the original glass 4 When making a copy from OHP transparencies, translucent paper, or other highly transparent original, position the original as detailed below. 1 2 Raise the document feeder or original cover. Place the document face down on the original glass. 3 Position the document on the scales above and to the left of the original glass. 4 5 6 7 Place a blank sheet of paper of the same size over the document. Gently lower the document feeder or original cover. For details, refer to "Making a basic copy" on page 4-3. This will start the copy cycle. bizhub 162/210 4-13 4 Positioning books on the original glass Making copies When copying an open book or magazine, position the original as detailed below. 1 Raise the document feeder or original cover. 7 WARNING Broken original glass by incorrect handling. % Do not place books weighing more than 3 kg on the original glass. In addition, do not press down extremely hard on the original, otherwise the machine may be damaged. 2 Position the book face down onto the original glass, with the top of the book toward the rear of the machine and with the center of the book aligned with the mark in the document scale. Gently lower the document feeder or original cover. 3 4 5 6 Press the [Book separation] key. The book separation indicator lights up Specify the desired copy settings. For details, refer to "Making a basic copy" on page 4-3. [. . . ] 6-12 Grouping . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14 Sorting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10 I Incorrect copies . . . . . . . . . . . . . . . . . . . . . 8-21 Installation site . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]