User manual KONICA MINOLTA BIZHUB C30P

[. . . ] PageScope Data Administrator V3 is an administration tool with which authentication data and addresses that are registered in the control panel of supported devices (multifunctional OA equipment) can be edited and changed from other computers on the network. After importing and editing authentication lists and address lists from devices, it can be used to then export these lists to devices. PageScope Data Administrator V3 can import address lists in formats such as XML, CSV, TAB, LDIF, and Lotus Notes Structured Text. The LDAP protocol can be used to both search and browse destination data on directory servers such as Active Directory, and to import these addresses. [. . . ] 1 characters): If Other is specified, specify the character to use as a delimiter. Set Item names for data to import in each row, and click Next. For how to display the screen, refer to "Import Information from Device" on page 3-44 for details. Select starting position mode: To start import from first line of the displayed file, select Import data into the first unregistered line, and to start import from a selected line of the displayed file, select Import from the selected line. destination type: Select the destination type. Items that can be selected may differ depending on the device type and options. For how to display the screen, refer to "Import Information from Device" on page 3-44 for details. From the File menu, select Import -- Import from the previous device. the Import from a device screen is displayed. Set devices from which to import abbreviated address data, and click Import data. Select a device: To select devices from the automatically detected device list, choose Select device, and to select connected devices by specifying their IP address or host name, select Input a device address. Refresh: Re-search for devices within a specified search range. Search settings: Set the search range for devices. To start import from first line of the displayed file, select Import data into the first unregistered line, and to start import from a selected line of the displayed file, select Import from the selected line. From the Import from device screen, click Search settings. Start IP: Input the start IP address of the search range. End IP: Input the end IP address of the search range. Select the search range to delete from the list, and click Delete. Bulk copy authentication settings and address settings from one device to multiple devices. Set by following the directions on the bulk copy wizard screen. These functions may not be available depending on the device or firmware version. Copy Settings from One Device to Another Device This clears the user counter and group counter of the target device. [. . . ] Failed to change the user box owner The change authentication mode wizard is not able to boot up because data are updated. Please retry after writing it to the device Device data is changed from other application Device of non-SSL communication is detected. (If you want to activate SSL, visit PageScope Web Connection and activate the SSL settings of `bizhub IS OpenAPI'. ) Required field error Error: Input length over Error: unavailable character is used Error: the numerical value is not set Error: range over The object is not chosen Duplicate device IP addresses exist Timeout error There is a possibility that the SNMP read community name is changed. [. . . ]