User manual KONICA MINOLTA BIZHUB PRO 1050P UM 1.1.0

[. . . ] 1050p User Manual Table of Contents 1 Safety Information 1. 1 1. 1. 1 1. 1. 2 1. 2 1. 2. 1 1. 2. 2 1. 2. 3 1. 2. 4 1. 2. 5 1. 3 1. 4 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Warning and Precaution Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Meaning of Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Regulation Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Enter the number to distribute using the keypad or the arrow keys (, ) and (+), then touch [OK]. Touch [OK] to complete the setting and return to the Authentication Method Setting Menu Screen. Touch [Return] to restore the Machine Manager Setting Menu Screen. 13-30 bizhub PRO 1050P Machine Manager Setting 02 Section Management Setting 13 Use this function to set Printer jobs managed by the section, and select the machine condition in which the machine stops due to reaching the print limit. ! Details If [Printer] is set to Off when Section Authentication is set to On on the Authentication Method Setting Screen, the section password is not required to enter for authentication. In this case, job count and print limit count will be suspended. When [Immediately] of [Limit Reached Stop Setting] is selected, the job is immediately suspended as soon as the print limit is reached. In this case, output data will not be hold. In order to continue the job with the same section password, change the number of the print limit which is set to the section password or reset counting. When [After Print] is selected, the machine stops after completing the job as reaching the print limit. The message "Print limit reached" is displayed, and the machine stops its operation. When [Warning Only] is selected, the message "Print limit reached" is displayed as reaching the print limit, and the next job can be continuously executed. bizhub PRO 1050P 13-31 13 Machine Manager Setting Procedure 1 2 3 4 5 Touch [03 User Auth. /Volume Track] - [01 Authentication Method] - [02 Section Management Setting]. Select [On] or [Off] on the right side of [Printer]. Select [Immediately], [After Print], or [Warning Only] on the right side of [Limit Reached Stop Setting]. Touch [OK] to complete the setting and return to the Authentication Method Setting Menu Screen. Touch [Return] to restore the Machine Manager Setting Menu Screen. 13-32 bizhub PRO 1050P Machine Manager Setting 13 13. 4. 2 02 Volume Track Use this function to assign a number to each section, and set a section name, password and limit value to each number. The registered section management setting is listed on the screen. Select the section management setting from the list and change, reset or delete the setting. bizhub PRO 1050P 13-33 13 Machine Manager Setting 13-34 bizhub PRO 1050P Machine Manager Setting 13 bizhub PRO 1050P 13-35 13 Machine Manager Setting Procedure 1 2 Touch [03 User Auth. /Volume Track] - [02 Volume Track]. Follow the instructions below for adding, changing and deleting the section setting, and also resetting the print count. To change section settings: Touch [Next] or [Previous] to display the section name to be changed and touch to highlight it. Touch [Change] to display the Change Registered Section Screen. Touch the desired item to be changed and display the input screen. For the details on entering texts in the input screen, see the appendix. You may enter eight digits for the password, eight characters for the section name, and eight digits for the print limit. The message will be displayed when the changed password or section name is duplicated. Touch [No] to accept the duplication, or touch [Yes] to enter another password or section name. [. . . ] 16-8 Tray Priority . . . . . . . . . . . . . . . . . . . . . . . . . 12-15 Tray Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17 Tray setting list . . . . . . . . . . . . . . . . . . . . . . . . 16-14 Turn Off the Power . . . . . . . . . . . . . . . . [. . . ]