User manual KONICA MINOLTA BIZHUB-500-420 PH2 UM COPY 1-1-0

[. . . ] 500/420 User Manual Contents 1 Introduction 1. 1 Energy Star®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Low Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To resume the initial setting for all settings including application function, press [Reset] on the control panel. 2 Note If no other setting is desired, the copy job can be started using the settings currently specified without touching [OK] to return to the Basic Screen. bizhub 500/420 (Phase 2) 6-75 6 6. 12 Application Functions Creating Margin of Copy Image (Page Margin) Use this function to create a binding margin on copies in order to make it easier for filing purposes. Selecting the binding position of double-sided copies, the image orientation of the back side of copies can be changed. Also, use this function to adjust the position of copy image on both front and back sides when making double-sided copies, in order to correct the image dislocation. Function overview Function Creating binding margin (Page Margin) Description Selecting binding position (Page Margin) Adjusting image position on front/back sides (Edit Margin) 6-76 bizhub 500/420 (Phase 2) Application Functions Creating Binding Margin/ Selecting Binding Position 6 This function creates a binding margin on copies in order to make it easier for filing purposes. With the margin set to "None", the desired binding position of the doublesided copy can be specified for the purpose of changing the image orientation. To copy using Page Margin 0 The factory default is Auto for the binding position, None for the margin. 0 Available range for the margin is 0. 1 mm ~ 20. 0 mm in 0. 1 mm increments. 0 With Auto selected, the machine automatically selects the binding position according to the orientation of loaded original. When making double-sided copies, the binding position will be determined automatically to the longer side for A4 or smaller original, or to the shorter side for B4 or larger original. 0 Staple and punch position settings will take priority if they conflict with the specified binding position. 1 2 3 Position the original. Enter the desired print quantity from the control panel keypad. Touch [Application] tab on the Basic Screen. The Application Screen will be displayed. bizhub 500/420 (Phase 2) 6-77 6 4 Touch [Page Margin] on the Application Screen. Application Functions The Page Margin Screen will be displayed. 5 Select the binding position. ­ Touch the desired binding position key to highlight it. 6-78 bizhub 500/420 (Phase 2) Application Functions 6 6 Specify the binding margin. ­ ­ Use [+] and [­] to enter the desired value in 1/16 in. When [None] is highlighted, the margin is automatically set to 0 mm. Use [None] for correcting the image orientation of double-sided copy. ?? 7 What should be done if wrong value is entered?Press [C] (Clear) on the control panel, then reenter the correct value. What if the value just entered is out of available range?% The Input Error message will be displayed. Press [C] (Clear) on the control panel, then reenter the correct value. Is it available to change the binding position even if the margin is already specified?The binding position can be changed at any time. Touch [OK] to return to the Application Screen. [. . . ] In either case, the Security Details Screen will be restored. bizhub 500/420 (Phase 2) 16-149 16 4 ­ Utility <Administrator Setting> Specify the Prohibit Functions When Auth. Error] to display the Prohibit Functions When Auth. Error Screen, then select either [Mode 1] or [Mode 2]. ­ When Selecting [Mode 2], enter the number of tries (1~5) using [-] and [+]. ­ Touch [Release] to display the Release Setting Screen, then touch the desired key to highlight it. (It is possible to select plural keys. ) 16-150 bizhub 500/420 (Phase 2) Utility <Administrator Setting> 16 5 Select whether or not to allow users to input the destination manually. [. . . ]