User manual KONICA MINOLTA BIZHUB-500-420 UM COPY 1-1-0

[. . . ] 500/420 User Manual Contents 1 Introduction 1. 1 Energy Star®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Low Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Simplex/Duplex setting is automatically specified as 1%2. If the double-sided original is loaded in the ADF, touch [Simplex/Duplex] to select 2%2 mode on the Simplex/Duplex Screen. 8 Press [Start] on the control panel. The machine will start scanning the original, then printing when ready for output. 2 Note To release the selected application function, touch [OFF]. To release all the application functions, touch [Reset]. To resume the initial setting for all settings including application function, press [Reset] on the control panel. 2 Note If no other setting is desired, the copy job can be started using the settings currently specified without touching [OK] to return to the Application Screen or Basic Screen. 6-66 bizhub 500/420 Application Functions 6 6. 10 Reversing Color and Gradation of Image (Neg-Pos. Reverse) Use this function to reverse the image from black-on-white to white-onblack, and vice versa. Function overview bizhub 500/420 6-67 6 To copy using Neg-/Pos. Reverse Application Functions 1 2 3 Position the original. Enter the desired print quantity from the control panel keypad. Touch [Application] tab on the Basic Screen. The Application Screen will be displayed. 4 Touch [Neg. /Pos. Reverse] on the Application Screen to highlight it. 5 6 Select additional copy conditions, as desired. The machine will start scanning the original, then printing when ready for output. 6-68 bizhub 500/420 Application Functions 6 2 Note To release the selected application function, touch [OFF]. To release all the application functions, touch [Reset]. To resume the initial setting for all settings including application function, press [Reset] on the control panel. 2 Note If no other setting is desired, the copy job can be started using the settings currently specified without touching [OK] to return to the Basic Screen. bizhub 500/420 6-69 6 6. 11 Application Functions Creating Margin of Copy Image (Page Margin) Use this function to create a binding margin on copies in order to make it easier for filing purposes. Selecting the binding position of double-sided copies, the image orientation of the back side of copies can be changed. Also, use this function to adjust the position of copy image on both front and back sides when making double-sided copies, in order to correct the image dislocation. Function overview Function Creating binding margin (Page Margin) Description Selecting binding position (Page Margin) Adjusting image position on front/back sides (Edit Margin) 6-70 bizhub 500/420 Application Functions 6 6. 11. 1 Creating Binding Margin/ Selecting Binding Position This function creates a binding margin on copies in order to make it easier for filing purposes. With the margin set to "None", the desired binding position of the doublesided copy can be specified for the purpose of changing the image orientation. To copy using Page Margin 0 The factory default is Auto for the binding position, None for the margin. 0 Available range for the margin is 0. 1 mm ~ 20. 0 mm in 0. 1 mm increments. 0 With Auto selected, the machine automatically selects the binding position according to the orientation of loaded original. When making double-sided copies, the binding position will be determined automatically to the longer side for A4 or smaller original, or to the shorter side for B4 or larger original. [. . . ] In either case, the Security Setting Screen will be restored. If further changes are required, touch the desired key. bizhub 500/420 16-135 16 16. 6. 2 3 Administrator Security Level Utility <Administrator Setting> Specify the administrator settings to be allowed to general users. To specify Administrator Security Level 1 2 Follow the procedure on page 16-3 to display the Administrator Setting Screen. Touch [9 Security Setting], then touch [3 Administrator Security Level]. The Administrator Security Level Screen will be displayed. 16-136 bizhub 500/420 Utility <Administrator Setting> 16 3 Select the desired security level from [Level 1], [Level 2], and [Prohibit]. ­ ­ ­ [Level 1]: Allow the general users to specify the Power Save Setting, Auto Zoom (Platen), Auto Zoom (ADF), Select Tray when APS OFF, and Select Tray for Insert Sheet. [. . . ]