User manual KONICA MINOLTA CF911P

[. . . ] Using the Printer Properly To ensure the optimum performance of the printer, follow the precautions listed below. · · · · · · · · · · Never place a heavy object on the printer. Never open any doors or turn the printer off while the printer is making printings. Never bring any magnetized object near the printer. [. . . ] These keys are also used to switch between numerical values and characters. These keys shift the cursor horizontally within the display. This key selects the menus and items that are displayed and the menu display and items in the lower level. The operation corresponds to the horizontal arrow marks in the figure above. This key interrupts the menu and items that are displayed and returns operation to the menu and items at the previous upper level. w , keys: Set key: Cancel key: 4-2 Setup Menu Settings Chapter 4 w 2. Setup Menu Procedures Starting the Setup Menu. The Setup menu is made available when the printer is started. the menu key) when the following message is displayed. To update/setup Press any key This message is displayed for approximately 5 seconds. If no operation is performed at this time, the printer ready mode is set. The following service option screen is displayed by pressing any key. Startup Run Setup (3) To access the setup menu, press the Set key while "Startup Run Setup" is displayed. This will open the setup menu and the following screen will be displayed. LOADING SETTINGS Chapter 4 If a password is set, enter the password in the following operation. [Setup Exit] at the beginning of the setup menu will be displayed if no password has been set. Useful Tips · Select "Startup Start System" under Service Options, then press the Set key to enter the print ready state. · In addition, under Service options, a service menu in which the printer program can be checked and updated can be selected. For details on the service menu, please ask the service man. (4) When a password has been set, enter the password. ENTER PASSWORD Password Setup Menu Settings Use the v or w key to switch the display of the first character. Use the key to shift the cursor to the second character and set the second and subsequent characters in the same manner as the first character. After the password is input, press the Set key. When the password has been confirmed, the "Setup Exit" screen in the Setup menu is displayed. Setup Exit 4-3 w 2. Setup Menu Procedures Operating the Setup Menu The Setup menu is accessed in the following sequence: Menu selection Set key Submenu selection Set key Select the desired setting menu and change the setting. Refer to the section "Setup Menu Transition Diagram" ( p. 4-10) for an illustration of the menu hierarchy and the items that can be set. (1) Use the w and v keys to select the main menu. Setup EXIT w Setup Server Setup v w Setup Network Setup v w (Next menu) v Chapter 4 Setup Menu Settings (2) Press the Set key. [. . . ] of Bins Modes Kinds of Paper 1 non-sort Bin Sort Bins: 10 (From 2nd Bin to 11th Bin) Non-Sort Mode, Sort Mode, Group Mode Non-Sort Mode: Plain paper (60 to 90g/m²) (16 lbs. to 24 lbs. ) Special paper (Thick paper, OHP Transparencies) Sort Mode, Group Mode: Plain paper (60 to 90g/m²) (16 lbs. to 24 lbs. ) Non-Sort Mode: A3 Wide, A3L, B4L, A4L, A4C, A5L (12"×18"L, 11"×17"L to InvoiceL) Sort Mode, Group Mode: A3L, B4L, A4L, A4C, A5L (11"×17"L to Invoice) Non-Sort Mode Plain paper: Max 50 sheets (A3L: 80g/m² paper) (11"×17"L / 21-1/4 lbs. paper) Special paper OHP Transparencies : 10 sheets in 1st bin (Max. [. . . ]