User manual KONICA MINOLTA DI620

[. . . ] Table of Contents Using the Copier Properly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-1 DI 620. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-3 CE Marking (Declaration of Conformity) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-4 Terms and Symbols for the Type of Originals and Copy Paper. . . . . [. . . ] So, Copy (A5L) use care when making a reduction or enlargement copy. Example: Erasing the center of an A3 size book original on a copy reduced by x 0. 5: If you want to erase the 20-mm-wide center margin on the original, select 20 mm for the erase width. Di620 3-81 3 Image Repeat Making Copies The image of the original is repeatedly produced on the copy paper. The copier automatically calculates the number of images that can be printed based on the copy paper size and zoom ratio. Functions l With Dotted Line Provides dotted lines between the adjacent images on the copy. l Without Dotted Line Provides no dotted lines between images on the copy. 3-82 Di620 Making Copies Selecting Image Repeat 3 1 2 Load the originals. Select the desired copy paper and zoom ratio. Selecting the Zoom, see page 3-20. ) Touch [Image Repeat]. 3 4 Select whether you want a dotted line or not by touching [YES] or [NO]. 5 Touch [Auto Detect] to detect the original size. NOTE 6 For an original placed directly on the Original Glass, enter its size using the size input. For using Size Input, see the instruction on the right. Touch [Enter]. Di620 3-83 3 l Size Input Making Copies m Original Size is standard. Select the size of originals and touch [Enter]. m Original Size is nonstandard Touch [Size Input], then touch [Custom Size] in step 5. m Touch the [X] or [Y] key and enter the size of the original using the 10-key Pad. m Touch [Enter]. 3-84 Di620 Making Copies Number Stamping 3 The copier places on each copy the date of copying (Date), page number (Page) and a reference number for each copy set (Distribution). Functions l Date Places a date of copying on each copy. The image area on which the date is printed may be erased. l Page Places a page number on each copy. The image area on which the page number is printed may be erased. l Distribution Places a reference (distribution) number on the background of the copy, as assigned to each copy set. Di620 3-85 3 Using Date Making Copies 1 2 Load your originals. Touch [Number Stamping]. 3 Touch [Date]. 4 Select the desired date stamping position. 5 Select whether to block out the background [Yes] or not [No]. 3-86 Di620 Making Copies 3 Useful Tip Blocking out the background The background image is erased and the date is printed on the erased area. Not blocking out The date is printed over the background image. 6 Touch [Enter]. Useful Tip User's Choice allows you to set the date and time, date printing format, and date printing position, see page 4-23, see page 4-23. Di620 3-87 3 Using Page Making Copies 1 2 Load your originals. Touch [Number Stamping]. 3 Touch [Page]. 4 Enter the starting number from the 10-Key Pad. 5 Enter the staring page number from the 10-Key Pad. 6 Select whether to block out the background [Yes] or not [No]. 3-88 Di620 Making Copies 3 Useful Tip Blocking out the background The background image is erased and the page number is printed on the erased area. Not blocking out The page number is printed over the background image. 7 Touch [Enter]. Useful Tips User's Choice allows you to set the page number position, see page 4-23. Page number is reset to 0 when reaching 999999999. Di620 3-89 3 Using Distribution Making Copies 1 2 Load your originals. Touch [Number Stamping]. 3 Touch [Distribution]. 4 Enter the starting number from the 10-Key Pad. 5 Select the page on which to print the distribution number, either [First page] only or [All pages]. 6 7 Select the image density, either Darker, Normal, or Lighter. Touch [Enter]. Useful Tip The Distribution number is reset to 0 when reaching 999. 3-90 Di620 Making Copies Image Stamping Image Stamping lets you print a preprogrammed image at a specified location on the copy. The image can be printed at up to three places. 3 Checking the Preprogrammed Image The preprogrammed image can be checked in advance. 1 Touch [Image Stamping]. 2 Touch [Check] and select the image to be checked. 3 Select the copy paper and press the Start key. NOTE It is not possible to check the preprogrammed image if a job has been reserved. Di620 3-91 3 Making Copies Useful Tips A preprogrammed image can be stored in memory using Utility. Image Memory Input, see page 4-8. A preprogrammed image can also be checked using Utility. Checking Programmed Image, see page 4-13. 3-92 Di620 Making Copies Calling up a Preprogrammed Image You may want to call up a preprogrammed image for use on the copy. 3 1 2 Load the originals. Touch [Image Stamping]. 3 Touch [Set] and select the desired image. 4 Select the image stamping position. 5 6 Select the desired image density. Touch [Enter]. Di620 3-93 3 7 Touch [Enter]. Making Copies Useful Tip Up to three preprogrammed images can be placed on the copy. NOTE If two or more images are used, each has to be different from the other and should be placed in a unique position. (No two images can be exactly the same. ) When using Image Stamping, select the "Original Direction", see page 3-52. 3-94 Di620 Making Copies 3 3. 9 Mixed Orig. Detection and Other Functions These pages explain about Mixed Original Detection and other documentrelated functions the copier offers. Pressing the [Original] key on the control panel shows a screen that allows you to set these functions. Touching either one of the four function keys highlights that particular key, which sets that function. [. . . ] 3-31 Start Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17 Stop Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17 Storing a Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Storing a Ratio in Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]