User manual KONICA MINOLTA DI750PE

[. . . ] 4133-7707-01 Di750PE Operator's Manual Recycled paper is used for the inside pages of this book. Di750PE Network Printing System Operator's Manual Thank you for choosing Minolta quality. For over 30 years Minolta has been a leader on the forefront of office equipment technology and service. Our desire has always been to bring you highly reliable products. We pledge to continue to provide you, our customer, with our state of the art equipment, as well as full customer service for all our products. [. . . ] (a thick cover paper included) Booklet tray capacity: Approx. of 5-sheet-folded booklet (20 x 5 = 100 sheets) 10 sets max. of 10-sheet-folded booklet (10 x 10 = 100 sheets) 6 sets max. of 16-sheet-folded booklet (6 x 16 = 96 sheets) Cover Inserter A Paper size: A3, B4, F4, A4, A4R, B5, A5 Paper weight in cover sheet mode: 50~200g/m2 (200g/m2 thick paper) Paper weight in manual staple: 60~90g/m2 Output Modes 6-3 Output Modes FN-104/FN-4 Finisher Specifications (continued) Punch Kit Punching Mode Punching mode is available in combination with Primary (Main) Tray output modes Paper size: A3, B4, A4, B5 Paper weight: 60~170g/m2 Number of holes: 4 holes Hole diameter: 6. 5 mm 0. 5 mm Hole pitch: 80 mm 0. 5 mm Trimming Unit Tray (FN-4 Finisher only) Trimming Mode Paper size: A3, B4, A4R, 8. 5"x11"R Paper weight: 60~90g/m2; Special stock (80g/m2 paper is recommended) Number of trimmed sheet: 3 sheets max. using 80g/m2 paper only with Stapling & Folding mode 15 sheets max. using a thick cover paper with Stapling & Folding mode Trimming width: 10 mm max. of 2~5-sheet-folded booklet 50 sets max. of 6~10-sheet-folded booklet 32 sets max. of 11~16-sheet-folded booklet 6-4 Output Modes Output Modes Non-Sort Mode Using Primary (Main) Tray Non-Sort mode simply means that the offset-stacker finisher modes are not selected. Prints will be stacked upon exit without being offset by sorted sets. With the Primary (main) tray initially selected on the Finisher Mode Selection Screen, FN-104/FN-4 outputs the printed sheets FACE DOWN in the proper order. Paper size: A3, B4, F4, A4, A4R, B5, B5R, A5, A5R Paper capacity for 80g/m2: 500 sheets A5, A5R 3, 000 sheets A4, A4R, B5, B5R 1, 500 sheets A3, B4, F4 1 2 3 3 3 1 2 1 2 CAUTION: When the selected print quantity exceeds the Finisher's maximum capacity, remove the copied sheets while paper is exiting to avoid paper mishandling. Output Modes 6-5 Output Modes Sort Mode Using Primary (Main) Tray Use this mode when you want to output multiple prints of the original set, and have each sorted set offset upon exit. The staple mode can be selected with the sort mode. With the Primary (main) tray initially selected on the Finisher Mode Selection Screen, FN-104/FN-4 outputs the printed sheets FACE DOWN in the proper order. Paper size: A3, B4, F4, A4, A4R, B5, B5R, A5, A5R (A5 paper is available in crosswise type feeding only) Paper capacity for 80g/m2: 500 sheets A5, A5R 3, 000 sheets A4, A4R, B5, B5R 1, 500 sheets A4, B4, F4 1 2 3 3 3 1 2 1 2 30mm CAUTION: When the selected print quantity exceeds the Finisher's maximum capacity, remove the copied sheets while paper is exiting to avoid paper mishandling. 6-6 Output Modes Output Modes Staple-Sort Mode Using Primary (Main) Tray Use this mode when you want to offset and staple each printed set. Stapling position and number of staples (1 or 2) can be designated on the screen. Each finished set will be offset from the next printed set. With the Primary (main) tray initially selected on the Finisher Mode Selection Screen, FN-104/FN-4 outputs the printed sheets FACE DOWN in the proper order. Stapled paper at 1 position: A3, B4, F4, A4, A4R, B5, A5 (A5 is available in crosswise orientation only. ) Stapled paper at 2 positions: A4 paper is available in both lengthwise ( ) and crosswise ( ) orientation. B5 paper is available in crosswise ( ) orientation only. A3, B4 or F4 paper is available in lengthwise ( ) orientation only. Paper capacity for 80g/m2: 1, 000 sheets (Variable according to the number of pages to be stapled. 4-5 for details. ) Staple capacity: 50 sheets 80g/m2 (5. 0mm thick or less) (Staple capacity is changeable, and may be set to 45, 40, or 35 by your service representative. ) Staple position: 1 oblique staple; 1 parallel staple; 2 parallel staples 3 2 3 2 3 2 3 2 3 2 3 1 3 2 3 2 1 3 2 1 1 1 1 1 oblique staple 1 parallel staple 2 parallel staples CAUTION: When the selected print quantity exceeds the Finisher's maximum capacity, remove the copied sheets while paper is exiting to avoid paper mishandling. Output Modes 6-7 Output Modes Folding, Stapling & Folding and Trimming Modes The Folding and Stapling & Folding modes are available only when the FN-4 Finisher option is installed. The Trimming modes (Folding and Trimming, Stapling & Folding and Trimming) are available only when the TMG-1 Trimming unit option is installed on the FN-4 Finisher. When printing in the Booklet mode, specify the Booklet function on the MicroPress Server. NOTES: 1. [. . . ] 6 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other Key Operator settings are required, select the desired menu item, from [1] to [17]. 7 Touch PREVIOUS SCREEN to return to the Basic Screen and perform printing operations. NOTE: If an invalid password is entered, enter a valid 4-digit password. 8-34 Key Operator Mode Key Operator Mode Side 2 Lens Adjustment [16] Use this function to set the adjustment data of the magnification ratio for each tray as Side 2. Key Operator Mode Screen 2 Side 2 Lens Adjustment Screen 1 Press [Help] to display the Help Screen, then touch Key Operator Mode. [. . . ]