User manual KONICA MINOLTA EP5400

[. . . ] In addition, high speed copiers will be set to automatically make double sided copies. An organization's paper costs can be reduced by $60 a month and the volume of paper sent into the waste stream will decline. It takes 10 times more energy to produce a piece of paper than it does to make a single copy on a copier. Therefore, using less paper also means decreased national energy consumption. Recycled Paper (USA market only) Your Minolta Copier has been designed to use the following Recycled Paper Minolta Recycled Bond 20% Post Consumer Waste Item No. [. . . ] 13 Using the Semi-automatic Document Handler (SDH). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Guidelines for Originals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 14 Positioning the Original . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. Setting the Number of Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 15 Setting the Number of Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. Setting Image Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 16 Setting Image Density . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Auto Exposure Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 16 Manual Exposure Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. Setting the Zoom Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 17 Setting the Zoom Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (See page 16. ) Making Copies C1159O009EA To change image density. C1159O016DA 4. Use the Copy Quantity keys to set the number of copies to be made. (See page 15. ) * If the original has been placed in the Semi-automatic Document Handler (SDH), the display will automatically show the number "1". * To clear a wrong setting, press the Clear/Stop Key and then make the setting once again. C1159O017DA 5. Press the start key and copying will begin. * Press the Clear/Stop Key to interrupt continuous copying. Copying will automatically stop. C1159O018DA 13 2. Positioning the Original Positioning on the Glass Different methods of positioning the original will be used, depending on its type. Paper Originals (The original is plain or thick paper. ) Transparent Originals (The original is a transparency or translucent paper. ) 1 2 Raise the original cover. 1 2 Place the original the same way as for a paper original. Cover the original with a piece of paper that is the same size as the original. Chapter 3 Place the original face down on the glass. C1159O013DA C1159O020DA 3 Align the center of the original with the f marker on the scale provided. 3 Gently lower the original cover. C1159O019DA 4 Gently lower the original cover. Making Copies 14 2. Positioning the Original Using the Semi-automatic Document Handler (SDH) Load the originals into the SDH . [. . . ] (See page 17. ) Place the original correctly on the Original Glass. (See page 13. ) Or, load it onto the SDH correctly along the Guide Plates. (See page 14. ) Raise the SDH and place the originals on the Original Glass one at a time. (See page 14. ) The originals may not be suitable for use in the SDH. C1159O118DA Troubleshooting Chapter 6 42 2. [. . . ]