User manual KONICA MINOLTA FK-502

[. . . ] User's Guide [FK-502 Fax Operations] Contents Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x-15 ACKNOWLEDGEMENT: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x-15 COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x-15 EXEMPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In such cases, fax can be sent after setting the Super G3 mode to Off by selecting [V. 34 mode when the transmission ends. 2 Note Following functions cannot be used simultaneously. Polling RX, Polling TX, Bulletin board registration, and Bulletin board Polling RX. Sending the fax after setting V. 34 OFF 1 2 Press [Fax/Scan] key to display the Fax/Scan screen. ­ For details on loading originals, refer to "Loading the original" on page 2-7. 3 4 Touch [Communication Settings]. Touch [Line Settings]. C451 6-50 Useful transmission functions 6 5 Touch [V. 34 OFF] once again to cancel the settings. When fax multi line is not installed When fax multi line is installed 6 7 8 Touch [OK]. Returns to Communication Settings screen. ­ ­ ­ For details on Scan Settings, refer to "Specifying scanning conditions" on page 2-12 or "Scan Settings" on page 6-2. For details on Original Settings, refer to "Original Settings" on page 6-4. For details on Communication Settings, refer to "Communication Settings" on page 6-5. C451 6-51 Useful transmission functions 6 9 Specify the destination. ­ For details on destination, refer to "Specifying only one destination" on page 2-17 and "Specifying multiple destinations (Sequential broadcast transmission or broadcast transmission)" on page 2-31. 10 Press [Start] key. ­ If the fax cannot be sent because the recipient's line is busy, the recipients number is redialed. For details on redial, refer to "When unable to send fax" on page 2-42. ­ To stop the transmission, refer to "Aborting transmission" on page 2-49. ­ If the fax could not be sent, refer to "Fax cannot be sent" on page 4-2. The scanned original is stored in the memory as a scheduled job and transmission is started. C451 6-52 Useful transmission functions 6 6. 16 Sending an original in Public/Personal/Group box by fax An original saved in Public/Personal/Group box can be sent by fax. Bind and send multiple originals saved in the box when they are to be sent by fax as a single job. ! Detail When an Personal box is logged in with user authentication, Group box can be used by logging in with account authentication. For details on the box function, refer to the User's Guide [Box Operations]. Sending an original in Public/Personal/Group box by fax 1 2 Press [User Box] key. Touch [Use Document]. C451 6-53 Useful transmission functions 6 3 Select [Public], [Personal], [Group] tab, then select the box with the job with the original that is to be used and then touch [OK]. ­ ­ ­ When a password is set to browse the box, enter the password and then touch [OK]. [. . . ] 1-11 Reception mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-42 Registered destination . . . . . . . . . . . . . . . . . . 2-17 Registering and Changing Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]