User manual KONICA MINOLTA FORCE 65

[. . . ] IP-511 Print Controller Network Scanner Read this manual before printing. Keep readily available for reference. Thank you very much for purchasing the Konica IP-511 Print Controller. This INSTRUCTION MANUAL includes instructions for printing, handling the machine correctly, and safety precautions. Please read this manual befor printing or using the equipment in any way. [. . . ] Pressing this key opens the [Enter File Name] screen. Any file name can be up to 26 alphanumeric characters long. Depending on the file format the extension ". tif" or ". pdf" is automatically added to the end of a file name. [ADDRESS] Press this key to go back to the [Select Transmission Object] screen. File Form You can choose a scanned data file form from [TIFF] and [PDF]. You cannot change the file form in the process of scanning in Store mode. At [Scan to HDD], the file format is fixed at [TIFF]. [SCAN MODE] Use this feature to determine whether the original document is Duplex or Simplex. If [Duplex] is selected, a message appears to mount the RADF. [SCAN DENSITY] Press this key to select a read density. The default is the same as that in the copy mode. You cannot change the file form in the process of scanning in Store mode. [LENS MODE] Press this key to change the magnification ratio at which the original document is read. [RE] is the same as the default in the copy mode. [ZOOM] range in each resolution are as follows: 200 dpi: 300 dpi: 400 dpi: 600 dpi: 75% - 400% 50% - 400% 38% - 400% 25% - 400% 3-4 Chapter 3 Scanner Operation [SCAN SIZE] Press this key to select the scanning paper size. This is available only when using the Platen mode. You can select [AUTO] or [SIZE SETTING]. [AUTO]:Same as the default in the copy mode [SIZE SETTING]:Allows you to select a scanning frame size. Example: When an 5. 5"x8. 5" original is loaded and you select 8. 5"x11", then the scanning takes on the 8. 5"x11" frame. Options: 5. 5"x8. 5", 5. 5"x8. 5"R, 8. 5"x11", 8. 5"x11"R, 8. 5"x14", 11"x17", A3, A4R, A4, A5R, A5, A6R, B4, B5R, B5, B6R, F4, Full AREA Default is [AUTO]. [QUALITY] Use this feature to select the resolution. You can select [600 dpi], [400 dpi], [300 dpi] or [200 dpi]. The scanned data is read into the copier's memory (E-RDH). If scanned data exceeds the E-RDH capacity, which translates into an error, you cannot go on with scanning. The following table shows how many Letter/A4-size originals can be scanned with the copier's standard memory (64 MB). Data Size (1 sheet) About 70 KB About 130 KB About 200 KB About 480 KB About 430 KB Resolution 200 dpi Original Text only Text and Picture Text only Text and Picture Text only No. of Originals About 890 About 480 About 310 About 130 About 140 About 40 400 dpi 600 dpi Text and Picture About 1. 43 MB Data Size and No. of Originals available to be read depend on data actually scanned. Understand that the numbers in the table are intended to serve as a rough guide for you. 3-5 Chapter 3 Scanner Operation Functions When scanning an original document, you can use advanced features such as Special Original, Z-Folded Original, Non-image Area Erase, Frame/Fold Erasure, Reverse Image, Full-image Area, and Dual Page. Special Original Pressing the [SPECIAL ORIGINAL] key in the scanning setting basic screen displays the special original screen which looks like this: After selecting an application function, pressing the [OK] key brings you back to the scanner setting basic screen. [. . . ] When launched next time, the application takes on the settings at the last exit. Appendix B-4 Appendix B Using Scan Direct Setting Menu Clicking [Setting] in the Main window gets the following pull-down menu appeared. Setting Auto-Polling Interval Clicking [Setting]-[Setting Auto-Polling Interval] opens the following window. In this window you can set the interval at which the auto polling is taken, in 1-minute increments, between 3 and 1440 minutes. The default is 10 minutes. List Logs Clicking [Setting]-[List Logs] opens the following window. The [Delete Logs] button deletes all of the logs. Log displays include the following: No. : Log number When you change file name or delete a file, a crisscross () is displayed to the left of the log number. [. . . ]