User manual KONICA MINOLTA FORCE 75

[. . . ] Force 75 Recycled paper is used for the inside pages of this book. Konica Force 75 Network Printing System User's Manual 2000 by Konica Business Technologies, Inc. MAINTENANCE AGREEMENT KONICA Force 75 Network Printing System will give you many years of trouble-free service. To ensure high quality printing performance and to prevent premature wear and failure of precision parts and components, periodic cleaning and routine adjustments should be scheduled. We recommend that you contact your service center to discuss the benefits and advantages of Konica's Customer Service Maintenance Agreement and to be shown how a maintenance plan can be tailored to your individual printing needs. NOTICE: Konica Business Technologies, Inc. has made every effort to ensure that the information in this manual is complete and accurate. [. . . ] When printing two-sided signature originals using the Folding, Stapling & Folding or Trimming mode, release the automatically selected Booklet mode. When printing dark originals or using Reverse Image mode together with Folding, Stapling & Folding or Trimming mode, the folded line of the output prints may be slightly shifted. CLOSE THE TRIMMER STACKER COVER; otherwise the machine cannot print. DO NOT OPEN THE TRIMMER STACKER COVER DURING PRINTING; otherwise, the machine will cease operating and a paper misfeed will occur. The following print results may be expected when using Folding, Stapling & Folding or Trimming mode: In the Folding mode, each printed set is folded and output to the Booklet tray of the finisher. In the Stapling & Folding mode, each printed set is stapled at two positions (saddle stitched), then folded and output to the Booklet tray of the finisher. In the Trimming modes, each printed set is either folded or stapled & folded; trimmed at the edge that opens the booklet; then output to the Trimmer uint tray. Max. number of folded sheets (20 lb Bond) in both modes: Folding; 3 sheets (less than in Staple & Folding mode because they are not cinched first) Stapling & Folding: 16 sheets 15 sheets when using thick cover paper Folding and Trimming; 3 sheets Stapling & Folding and Trimming; 16 sheets 15 sheets when using thick cover paper Paper size: 11"x17", 8. 5"x14", 8. 5"x11"R, A4R Paper weight: 16~24 lb; Special stock (20 lb paper is recommended) Booklet tray capacity: When the Booklet tray capacity is exceeded, the finisher will stop operating. Select an appropriate print quantity referring to the following capacity. of 3-sheet-folded booklet (33 x 3 = 99 sheets) Stapling & Folding; 20 sets max. of 5-sheet-folded booklet (20 x 5 = 100 sheets) 6 sets max. of 15-sheet-folded booklet (6 x 15 = 90 sheets) 6-8 Output Modes Output Modes Folding, Stapling & Folding and Trimming Modes (continued) Trimmer unit tray capacity: When the Trimmer unit tray capacity is exceeded, the finisher and trimmer unit will stop operating. Select an appropriate print quantity referring to the following capacity. of 3-sheet-folded booklet (300 sheets max. ) Stapling & Folding and Trimming; 100 sets max. of 2~5-sheet-folded booklet (500 sheets max. ) 50 sets max. of 6~10-sheet-folded booklet (500 sheets max. ) 32 sets max. of 11~16-sheet-folded booklet (512 sheets max. ) Incompatible Basic Printing Conditions with Booklet selected: Sort, Staple-sort, Group, Cover sheet feeding Incompatible Special Originals with Booklet selected: Resolution (Very high), Non STD size Incompatible Applications with Booklet selected: Sheet/Cover Insertion, Combination, Transparency Interleave, Repeat, Shift mode in Image Shift, Overlay Incompatible conditions without Booklet: Sort, Staple-sort, Group, Rotation Sort, Rotation Group, Transparency Interleave Folding Stapling & Folding Trimming 3 sheets max. 16 sheets max. when using thick cover paper Folding and Trimming Stapling & Folding and Trimming Output Modes 6-9 Output Modes Cover Sheet Feeder (Post Inserter) The Cover Sheet Feeder (PI-108) is available as an option on the FS-108/108B finisher. Load cover sheet paper into this device and use the sheets as front covers for printed sets output to the Main tray; or use the sheets as booklet type covers for printed sets output to the Booklet tray in the Folding or Stapling & Folding mode. NOTES: Paper loaded into the cover sheet feeder cannot be printed. This function is incompatible with cover sheet mode (COVER WITH PRINT SHEET and COVER WITH BLANK SHEET) in Booklet and Thick paper mode in Sheet/Cover Insertion. Cover paper size: 11"x17"~5. 5"x8. 5" (13~110 lb (200g/m2 cover paper)) Print paper size: 11"x17"~5. 5"x8. 5" (20 lb paper recommended) Incompatible: Output to Secondary (sub) tray, Cover Sheet mode with Booklet Cover sheet Set with cover attached Sets with cover attached in Folding or Stapling & Folding mode CAUTION: When the finisher capacity is exceeded due to the print quantity selected, remove the printed sets as they exit; otherwise, mishandled paper will occur. 6-10 Output Modes Output Modes Manual Stapling The Manual Stapling function is available only with the Cover Sheet Feeder (Post Inserter) option (PI-108) installed on the FS-108/108B Finisher. To use theis convenient function, simpley place a set of paper to be stapled into the cover sheet feeder of the finisher, select the desired staple mode from the manual stapling operation panel located on the top of the finisher, then press the [Staple Start/Stop] key. The stapled set will be delivered to the Booklet tray or the Primary (main) tray according to the selected mode, as described below. When selecting the Stapling & Folding, the machine with the Trimmer unit installed trims the end of booklet automatically and delivers it to the Trimmer unit tray. [. . . ] 7 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic Screen to perform Printing operations. NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password. Key Operator Mode 8-35 Key Operator Mode Side 2 Lens Adjustment [16] Use this function to set the adjustment data of the magnification ratio for each tray as Side 2. Key Operator Mode Screen 2 Side 2 Lens Adjustment Screen 1 Press [HELP] to display the Help Screen, then touch Key Operator Mode. Enter a 4-digit key operator password, then touch OK to display the Key Operator Mode Screen. (See note. ) 2 To display menus [11] to [17] of the Key Operator Mode Screen, touch Lower arrow key. [. . . ]