User manual KONICA MINOLTA IC-202

[. . . ] The essentials of imaging IC-202 Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7 Chapter 8 Chapter 9 Chapter 10 Chapter 11 Chapter 12 : : : : : : : : : : : : Overview Installing the Printer Driver Setting Up Network Printing Various Printing Methods Setting Up the PCL Driver Setting Up the KONICA MINOLTA PS Driver (Windows) Setting Up the PPD Driver (Windows) Setting Up the PPD Driver (Mac OS 9) Setting Up the PPD Driver (Mac OS X) Various Settings Troubleshooting Appendix Welcome Welcome Thank you for purchasing the Konica Minolta bizhub 750/600. The bizhub 750/600 is equipped with an integrated print controller in this machine which allows you to print directly from Windows-compatible computers or Macintosh computers by installing the IC-202 (controller release chip). This User's Guide describes the printing functions, operations, usage, and safety precautions of the print controller. In order to ensure that this machine is used efficiently, carefully read this manual before using the machine. [. . . ] Select the file, and then click the [OK]. ­ The Print dialog box appears again. Click the [OK]. Instead of executing a print job, the overlay data is saved. The file extension is ". kmf". 2 Note From the Overlay tab, the selected overlay data can be deleted by clicking the [Delete Overlay File]. IC-202 5-37 Setting Up the PCL Driver 5 5. 6 Specifying the Watermark Tab Settings Printing a Watermark You can print specific text in the background as a watermark. 1 2 3 4 Click the Watermark tab. From the drop-down list, select the watermark that you want to print. Specify the desired settings for [Type]. Overwrite: The background of the watermark is printed in white. Transparent: The background of the watermark is transparent. 5 Select the [1st Page Only] check box when printing in Watermark only the first page. IC-202 5-38 Setting Up the PCL Driver Editing a Watermark 5 You can change the fonts and position of the watermark and you can register a new one. 1 2 3 4 Click the Watermark tab. Specify settings for the following: ­ ­ ­ ­ ­ ­ Click to enter a new watermark in the watermark text box. [Delete]: Click to delete the selected watermark. Font Settings: Specifies the font and font size. Text Angle: Specifies the watermark print angle. Position: Specifies the watermark position with the horizontal and vertical scroll bars. Text Density: Specifies the text density with the slide bar. [Add]: IC-202 5-39 Setting Up the PCL Driver Printing the Document Number 5 When printing multiple copies, you can print the number of each document. 1 2 Click the Watermark tab. Select the [Distribution Number Stamping] check box. 3 Specify settings for the following: Pages to Print: Specifies the pages where the numbering is to be printed. Starting Number: Specifies the starting number. 2 Note The [Distribution Number Stamping] check box is not available if the "Collate" check box is not selected on the Setup tab. Set the character position and size on the control panel of this machine. IC-202 5-40 Setting Up the PCL Driver 5 5. 7 Specifying the Quality Tab Settings Pattern Represents the image with black and white dots at varying density. Selecting [Fine] increases the dot density. Default is [Coarse]. 1 2 Click the Quality tab. Click the [Fine] in [Pattern]. Print Density By selecting the [Toner Save] or [Draft Print] check box, toner consumption is saved or prints become lighter. 0 The [Toner Save] and [Draft Print] boxes in [Print Density] cannot be used at the same time. 1 2 3 Click the Quality tab. To save the toner consumption, select the [Toner Save] check box. [. . . ] 9-1 Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3, 9-2 Pages Per Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Pages per sheet Q Quality Adjustment . . . . . . . . . . . . . . . . . . . . . . . . 4-22 R Remote Printer Mode . . . . . . . . . . . [. . . ]