User manual KONICA MINOLTA IC-406 UM 100

[. . . ] Image Controller IC-406 User's Guide [Network Scanner Operations] [Copier Network Functions] Introduction Introduction Thank you for choosing this machine. This User's Guide contains descriptions of the network scanning functions and operations that can be used from optional C352/C300 image controller IC-406 and the network functions that can be used from the copier when the IC-406 is installed. To ensure the best possible performance and most effective use of the machine, read this manual thoroughly. After reading this User's Guide, store it in the designated holder for quick reference when problems or questions arise during operation. [. . . ] Sets the port number of the LDAP server. To change the value, press the [C] (clear) key, and then use the keypad to type in the value (between 1 and 65535). To change the value, press the [C] (clear) key, and then use the keypad to type in the value (between 1 and 65535). Port No. Port Number (SSL) Setting Up LDAP screen 4/6 Item Authentication Method Description Select the authentication method used when logging on to the LDAP server. [anonymous]: An authentication method that does not require the user name and password Is specified to [anonymous], dynamic authentication is disabled. [Simple]: A simple authentication method that requires the user name and password. Take caution since the passwords can be leaked over the network. [Digest-MD5]: An authentication method that can be used on a typical LDAP server. If authentication fails using Digest-MD5, the authentication is performed by automatically switching to CRAM-MD5. [GSS-SPNEGO]: An authentication method that can be used with Active Directory in Windows (Kerberos authentication). [NTLM v1] and [NTLM v2]: Not used when an image controller is installed. IC-406 6-11 Copier Network Functions Chapter 6 6 Setting Up LDAP screen 5/6 Item Select Server Authentication Method Description Copier Network Functions Select the method to be used during server authentication. Use The Setting Value: Authenticates the settings specified in Setting Up LDAP screen 6/6. [User Authentication]: When using the LDAP search function, a user name and password is requested. If a user is logged onto the copier with external authentication, the user name used with external authentication is automatically entered in the LDAP server logon screen. [Dynamic Authentication]: When using the LDAP search function, a user name and password is requested. Select whether to use the referral setting. When referral is used, the search base that was specified in LDAP Sever Setting searches the top and bottom levels as the starting point. Use Referral Setting Up LDAP screen 6/6 Item Login Name Description Sets the login name used to connect to the LDAP server. Use the keyboard that appears in the touch panel to type in the name (up to 255 characters). Sets the password used to connect to the LDAP server. Use the keyboard that appears in the touch panel to type in the password (up to 128 characters). Sets the domain name used to connect to the LDAP server as necessary. Use the keyboard that appears in the touch panel to type in the name (up to 64 characters). Password Chapter 6 Domain Name Copier Network Functions 6-12 IC-406 Copier Network Functions To specify Setting Up LDAP settings 6 1 2 3 4 In the Administrator Setting screen, touch [5 Network Setting]. (Refer to page 1-17 for more details. ) In the Network Setting screen, touch [4 LDAP Setting]. [. . . ] 1-15, 2-5 Scan settings . . . . . . . . . . . . . . . . . . . . . . . 1-10, 2-52 Scan size setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-60 Scan to e-mail . . . . . . . . . . . . . . . . . . . . . . . . . 1-3, 2-6 Scan to FTP . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]