User manual KONICA MINOLTA IP-711

[. . . ] INSTALLATION GUIDE IP-711 Printer Controller 8020/8031 NOTES · Before setting up, be sure to unplug the power cord of the machine. · Keep all packing materials out of the reach of children. Printed in Japan IP-711 s Operating Environment The printer controller IP-711 for Konica8020/8031 operates in the following environment. PC IBM PC and its compatibles, Pentium MMX 200MHz or higher, Memory 64MB or more (128MB or more for XP), HDD 10MB or more available space Windows 98/98SE, Windows Me, Windows NT4. 0 (SP3 or later), Windows 2000, Windows XP s Checking Accessories The printer controller comes with the following accessories. [. . . ] · The printer of the name registered from Network Management Utility Light will appear as an icon on the tree showing the network configuration. For Windows NT 4. 0, 2000, and XP · Select the "Ports" tab and select "Add Port. . . " - "Local Port. " Then, type \\NetBIOS name\Printing Service name. · Click the "Close" button to exit. NOTE Refer to the "Windows" of Network Management Utility Light for the NetBIOS name and the Printing Service name. Controller Network Setting Network settings can be made either from the copier control panel or through Network Management Utility Light used on a network PC. Use of Network Management Utility Light allows detailed settings that cannot be made from the copier control panel to be made. To use Network Management Utility Lightt, it is necessary to first set the IP address for the controller by following the procedure given below. Assigning the IP Address · Enter the Administrator mode on the copier control panel. · Open the [TCP/IP] screen by selecting [Network set] - [Common Setting] - [TCP/IP]. · Make the following settings: IP address : IP address of the controller Subnet mask : Subnet mask for the network to be connected Default gateway : IP address of the default gateway Check in advance with the network administrator on the setting values to be entered. · Turn the Power Switch OFF and then turn it ON. (This step is necessary to validate the data entered. ) Starting Network Management Utility Light · This is the tool for making settings from the Web browser (Microsoft Internet Explorer version 5. 5 or later, Netscape Communicator version 4. 5 or later) of the PC connected to the network. The program is mounted in the controller. 4334-7761-01 ­6­ IP-711 LPR Printing Setting Settings made on the controller side It is necessary that an IP address be assigned to the controller. Settings made on the PC side For Windows NT 4. 0 · Install the Microsoft TCP/IP print service. · Open Control Panel and double-click the network icon. · On the screen for selecting the manufacturer and model of the printer, click "Have Disk. . . " · Click the "Browse. . . " button, select the corresponding folder in the CD-ROM, and then click the "OK" button. · Select "Konica IP-711_8020/9231 PCL5c" or "Konica IP-711_8031/9331 PCL5c" from the printer list. Then, click "Next. " · Click the "Finish" button to exit from the "Add Printer Wizard". · Change the default printer setting and printer name as necessary. Then, carry out the test print. 4334-7761-01 ­7­ IP-711 NetWare Printing Setting Settings made on the controller side Settings are made to permit printing in the NetWare environment from Network Management Utility Light. NetWare Version NetWare 3. 2 Protocol IPX Service Mode PServer RPrinter NetWare 4. X IPX PServer Items to be set in Network Management Utility Light NetWare Setting, frame type, bindery, print server name, preferred file server, PServer NetWare Setting, frame type, bindery, print server name, RPrinter NetWare Setting, frame type, NDS, print server name, preferred NDS context name, tree name, PServer NetWare Setting, frame type, NDS, print server name, NPrinter NetWare Setting, frame type, NDS, print server name, preferred NDS context name, tree name, PServer TCP/IP setting s Scan Function Setting Settings must be made for the scan functions that are added by mounting the controller. There are two ways available to make these settings, one using the copier control panel and the other by way of the Web browser of the PC on the network (Network Management Utility Light). [. . . ] The following parameters can be set from Network Management Utility Light. · Open the "TWAIN" screen by selecting "Network set" - "TWAIN. " · Operation lock cancellation time can be set. NOTE It is necessary that the TWAIN driver be installed in the PC that is used for scan operations. One-Touch Key Registration and One Time Registration NOTE One-Touch Key Registration and One Time Registration can be set from Network Management Utility Light only. One-Touch Key Registration · Open the "One-Touch Key Registration" screen by selecting "Scan" - "One-Touch Key Registration. " · Select the index. [. . . ]