User manual KONICA MINOLTA IP-921 CONFIGURATION GUIDE

[. . . ] Fiery X3e Color Server SERVER & CONTROLLER SOLUTIONS CONFIGURATION GUIDE About the Documentation This manual is part of a set of Fiery X3e Color ServerTM documentation that includes the following manuals for users and system administrators. Most are available as Acrobat PDF (Portable Document Format) files on the User Documentation CD · The Quick Start Guide summarizes the steps for configuring the Fiery X3e Color Server and printing. It also describes how to access the Acrobat PDF files on User Documentation CD. · The User Software Installation Guide describes how to install software from the User Software CD to enable users to print to the Fiery X3e Color Server, and also describes setting up printing connections to the Fiery X3e. [. . . ] For more information, see "Setting up the Fiery X3e on TCP/IP networks" on page 2-19. PServer Setup options Network Setup Service Setup PServer Setup Enable PServer Yes/No [No] Select Yes if you have a Novell network connected to the Fiery X3e. Choose NDS Setup if your network uses NetWare in native mode. Choose Bindery Setup if your network uses NetWare in bindery emulation mode. If your network uses both NDS and Bindery, set up NDS first. If you set up NDS after Bindery, you will overwrite Bindery Setup. If your network uses both NDS and Bindery, and uses NetWare servers in bindery emulation, note that the Fiery X3e cannot service NDS and bindery emulation servers on the same NDS tree. 4 Network Setup Service Setup PServer Setup 4-21 Network Setup options NDS Setup Before entering NDS settings, make sure the Fiery X3e is connected to the network and that you have configured an NDS directory tree with a Printer, Print Server, and one or more Print Queue objects for Fiery X3e jobs (see page 2-13). To perform NDS Setup, you may need permission to browse the NDS tree. If access to the Print Server is restricted, you need a login password. The main objective of NDS Setup is to specify the Print Server object. In addition, you can indicate the location of the Fiery X3e print queues. NOTE: The terms NetWare server, Novell server, and IPX server are in common use and are used here interchangeably to mean the server on an IPX network running Novell NetWare networking software. Enable NDS Yes/No [No] Select Yes if the NetWare servers you will use to print to the Fiery X3e are running NetWare in native mode. Select NDS Tree List of trees Use the up and down arrow buttons to browse the list of NDS trees available to the Fiery X3e. Choose OK when you have displayed the tree that contains the Printer, Print Server, and Print Queue objects you previously defined for the Fiery X3e. Your new NDS tree selection automatically overwrites any previous tree selection. If you change the NDS tree selection and there are also current Bindery settings, you are alerted that they will be deleted. If you continue with NDS Setup, you can replace Bindery settings later. If you do not want to continue, press the Menu button to exit NDS Setup. 4 4-22 Performing Setup from the Control Panel Is user login needed to browse NDS tree?Yes/No [No] Select No if no password is required to browse the tree. You can proceed to navigate to the Print Server object. Select Yes if network permissions require that you log in to browse the NDS tree and see the Print Server object you want to select. If you select Yes, you are prompted to navigate to the User Login object. Navigate the NDS tree to User Login object. This message is displayed if you selected Yes for the previous option. Choose OK and browse the NDS tree, as described in the following paragraphs. NDS Tree name Object list, ". . " Browsing to find the User Login object begins with the NDS tree that you selected previously (with Select NDS Tree). Use the up and down arrow buttons to scroll through a list of objects in the tree beneath the [Root] in the hierarchy, or use the navigation symbol ". . " to go up one level at a time. [. . . ] nnn Notify IPX (Novell) Administrator. Troubleshooting Cause The Novell file server is down or out of connections. This error occurs while the server is trying to connect to the requested file server. Suggested action or exit Select a different file server (or try to get someone else to log off ). Pressing the Menu button returns to the PServer Setup screen. Indicates other network errors when the Fiery X3e is already connected to a file server. Something unexpected has happened and the user usually cannot recover without intervention of the network administrator. [. . . ]