User manual KONICA MINOLTA KONICA7075

[. . . ] 7075 INSTRUCTION MANUAL ENERGY STAR ® Program The Energy Star Program has been established to encourage the widespread and voluntary use of energy-efficient technologies that reduce energy consumption and prevent pollution. With its automatic energy saving features Auto Low Power and Auto Shutoff (see item 6. 3 Power Saver Mode) and the automatic duplex function, this product meets the Energy Star guidelines for energy efficiency. The key operator can adjust the interval after which the system goes into power saver mode. CE Declaration This product complies with EC Directives 73/23/EEC, 89/336/EEC, 92/31/EEC and 93/68/EEC. What KONICA 7075 has to offer: Highly Productive Konica 7075 produces 75 A4 copies or 44 A3 copies per minute. The integrated direct duplexing process enables automatic double-sided copying. [. . . ] Jobs, which display the little padlock symbol, are protected against overwriting. Contact your key operator if you want to have your job protected. ­ The screen displayed next allows to enter a name for the job (up to 16 digits). Use the DELETE key to correct a wrongly entered letter. ­ Press OK to save the job name, which is then displayed in the next screen. Again, press OK to confirm your settings and return to the Basic Screen. 38 8. Other Basic Functions 8. 6. 2 Recall Job Settings ­ On the operating panel, press the JOB MEMORY key. ­ Select the desired job by pressing the job number. If necessary, use the arrow key to display the required job memory key on the screen. Confirm your selection with OK; or press JOB CHECK to display the settings programmed in this job. ­ The system is now set to the selections of the recalled job. ­ After copying, you can recall the initial settings by pressing AUTO RESET. while a job is being processed) job settings cannot be recalled. 8. 7 Density Shift Density Shift 0 to 5; 3 is the standard setting and is factory-set in the system. Density shift 0 Density shift 1 Density shift 2 Density shift 3 (standard) Density shift 4 Density shift 5 The 9 manual density settings can be individually adjusted to a lighter or darker scale for each mode. ­ Press SPECIAL ORIGINAL in the Basic Screen. In the Enhance mode various density settings can be adjusted. ­ You can now adjust the density scale between 0 (dark) and 5 (light). The set value is indicated in the message area of the display. ­ For adjustments to the other modes (AUTO refers to Text/Photo mode) press the corresponding key and then P to call up the Density Shift mode. ­ Once you have completed the adjustment, press STOP to leave the Density Shift mode. 39 40 9. Special Functions This section deals with the system's special functions and explains how they are operated. How to Select Special Functions: ­ Pressing the APPLICATION key in the Basic Screen calls up the Application Selection Screen. ­ To activate a function, simply press the corresponding soft key. ­ For some functions another screen is displayed, in which further selections must be made. [. . . ] A3 A5R to A3+ (special size = 314 mm x 445 mm) Tray 2: 500 sheets A5R to A3+, user-adjustable (universal tray) Tray 2: 500 sheets A5R to A3+, user-adjustable (universal tray Tray 3: 1, 000 sheets A5R to A3+, user adjustable (universal tray) Tray 4*: 4, 000 sheets A4 Multi-Sheet Bypass: 150 sheets A6R to A3+, single sheets of special paper, labels etc. 50 to 200 g/m2 from the trays 50 to 200 g/m2 via the Multi-Sheet Bypass 60 to 170 g/m2 in the duplex unit Automatic or manual; 2 density user sets 1. Fixed ratios: 1:1, 50%, 71%, 82%, 86%, 115%, 122%, 141%, 200% 2. Three user sets for special ratios between 33 % and 400 % 3. Zoom 33 % to 400 % in 1 % steps, individual horizontal/vertical adjustment up to 9, 999 copies approx. [. . . ]