User manual KONICA MINOLTA PI4700E PHASE2 UM 2.1.0

[. . . ] User Manual Pi4700e www. minoltaeurope. com The essentials of imaging Table of Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-5 Trademark Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-5 Limited Software Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-6 Minolta Network Card Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Network Card must have valid IP parameters assigned. 3-8 Pi4700e Network Settings 3 3. 7 Specifying network settings from PageScope Light Access PageScope Light for Pi4700e can be accessed directly from a Web browser. 1 Start the Web browser. 2 In the URL field, enter the IP address of the printer controller as shown below. http://<IP address of printer controller>/ (Example) When the IP address of the printer controller is 192. 9. 200. 200: http://192. 9. 200. 200/ 3 This causes PageScope Light for Pi4700e screen to appear. Operation PageScope Light for Pi4700e operation is identical to that for Internet Web pages. Clicking a hot link jumps to the link destination, and the Back and Forward buttons scroll through pages backwards and forward. For further details of PageScope Light, please refer to the Advanced Information on the CD. Pi4700e 3-9 3 Logging In to the Admin Mode Network Settings After you log in to PageScope Light in the Admin Mode, you can change the configuration of the Digital Copier settings. 1 Type the administrator password into the Admin Password box. The initial default administrator password is sysadm. See "Preference" for information about how to change the password. 2 Click the Log-in button to log in to the Admin Mode. 3 When you want to log out, click the Log-out button. NOTE Î Î Log out is performed automatically if no operation is performed for more than 10 minutes. On the Network tab, a password input text box appears on each setting screen. You must be able to input the correct password in order to change Network tab settings. The password you should input here is the same as the Admin Password you input on other tabs. 3-10 Pi4700e Network Settings Network Tab Use the Network tab for configuring the Pi4700e network interface. 3 NOTE Î On the Network tab, you must type the password into the Password box that appears on the setting screen you select on the menu. Note, however, that you need to input the password on the Network tab only once per session. After you input the password, the Password box does not appear any more on other Network tab setting screens during the current session. Summary z This screen appears when you click the Summary menu on the Network tab. Use this screen to view a summery of the network interface card. Pi4700e 3-11 3 z TCP/IP Configuration Network Settings This screen appears when you click the TCP/IP Configuration menu on the Network tab. It lets you change a number of network interface card TCP/IP settings. NOTE Î Use only IP parameters that have been specified or approved by your network administrator. 3-12 Pi4700e Network Settings 3 z NetWare Configuration Sub-menus appear when you click the NetWare Configuration menu on the Network tab. Use the sub-menus to display and configure the network interface card settings for NetWare printing. Pi4700e 3-13 3 z NetWare Status Network Settings This screen appears when you click the NetWare Status sub-menu under the NetWare Configuration menu. Use this screen to check the status of the file server and queue to which the network interface card is attached. 3-14 Pi4700e Network Settings 3 z AppleTalk Configuration This screen appears when you click the AppleTalk Configuration menu on the Network tab. It lets you change a number of AppleTalk environment settings. Pi4700e 3-15 3 z IPP Configuration Network Settings This screen appears when you click the IPP Configuration menu on the Network tab. It lets you change Internet Printing Protocol (IPP) settings. You can configure the printer functions that are controlled by IPP and the printer information that can be seen from IPP clients. NOTE Î Î Standard access for IPP printing is: http://<IP Address>:631/nic/Print For details about IPP printing, see "5 Network Interface Card". 3-16 Pi4700e Network Settings 3 z WINS Configuration This screen appears when you click the WINS Configuration menu on the Network tab. WINS (Windows Internet Name Service) makes it possible for a device, such as your network interface card, to register a NetBIOS name (like MLT_995243) along with its current IP address (like 192. 9. 200. 200). [. . . ] If the error does not cancel normally, contact the LDAP server administrator. same as 18CC Please contact IT administrator. 18CD 1901 LDAP server connection terminated operationError : This is a general result code indicating that an error has occurred at LDAP Server. protocolError : This result code indicates that the LDAP client's request does not comply with the LDAP protocol of LDAP Server. timeLimitExceeded : This result code indicates that the time limit on a search operation has been exceeded at LDAP Server. [. . . ]