User manual KONICA MINOLTA PI4700E UM DRIVER 1.1.0

[. . . ] User Manual Pi4700e www. minoltaeurope. com The essentials of imaging Windows Driver, Convenient Functions Table of Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-1 Trademark Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-1 Limited Software Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-2 Minolta Network Card Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Staple, Punch or Cover mode is not set. When Collated is selected, Sorting is dimmed. Orientation Select the orientation of the image. You can check the selected direction using Page Layout. m Portrait Printing takes place lengthwise. m Landscape Printing takes place crosswise. TIP A Portrait or Landscape print appears on the Page Layout. Pi4700e - MS-Windows-Driver 1-23 1 Properties Settings Functions of the Edit Custom Paper or Custom Paper dialog box The name of the dialog box is Custom Paper for PCL6, Edit Custom Paper for PS. Use this dialog box to set special sizes of paper. 1 2 3 4 1. Paper Name Select the paper name from the Custom Paper list. This function allows you to set a special size of paper. When it is selected, the dialog box changes to the Custom Paper Setting Dialog Box. Number of registrations: Depending on environment used, number of registrations will be different. When it is selected, the dialog box changes to the Custom Paper Setting Dialog Box. Delete Deletes Custom Paper selected in (1). 1-24 Pi4700e - MS-Windows-Driver Properties Settings 1 Edit Custom Paper Setting dialog box (PS version) Custom Paper Setting dialog box (PCL 6 version) 5 6 7 5 6 5. Name Enter the Name of the Custom Paper Setting range: Max 20 characters 6. Setting range: Width: 4 to 11 11/16 (Unit = inch) 100 to 297 (Unit = mm) Height: 5 13/16 to 17 (Unit = inch) 148 to 432 (Unit = mm) 7. Unit Switches input units of paper size between inch and metric. Pi4700e - MS-Windows-Driver 1-25 1 1. 6 Quality tab PCL6 version Properties Settings 2 1 1. Resolution Select the printing resolution. Smoothing Correct the edges of the printed image. Available settings: On, Off NOTE è This function is used with a document whose contents are mainly text. Using the function with a photo image could even dirty the produced image. 1-26 Pi4700e - MS-Windows-Driver Properties Settings PS version 1 1 2 4 3 5 1. Brightness Perform brightness adjustment. Specify the method of dithering to express gray. [. . . ] To ensure proper printing operation, however, turn OFF these items of the application, and make the necessary settings in each tab of the printer driver. 3 The Minolta Di470 PCL6 Properties dialog box will appear. 4 Make settings in Setup, Paper, Quality, Job Management and PostScript properties as necessary. 5 Click the Save button. TIP If setting is changed as in step 4, the Easy Set Name becomes Untitled and the Save button will appear. 6 The Save Easy Set Name dialog box will appear. Input the Easy Set Name to be registered and click the OK button. 2-32 Pi4700e - MS-Windows-Driver Convenient Functions 2 TIP If the same Easy Set Name already exists, a dialog box asking whether it should be over-written or not will appear. 7 Click the OK button. 8 The Print dialog box will then reappear. [. . . ]