User manual KONICA MINOLTA RELEASE NOTES, VERS 1. 1

[. . . ] Make sure that you enter the date correctly. E-mail Services You cannot enter more than 20 characters for the host name. 2003 Electronics For Imaging, Inc. Part Number: 45031167 Page 2 Some entries in Setup are not displayed after saving and exiting The values for Jobs Saved in Printed Queue, Port Timeout in Seconds, and Polling Interval are not displayed after you enter and save them, and then exit Setup. Print a Configuration page to confirm these values. The possible range of values, where applicable, and the default values in brackets are as follows: Jobs Saved in Printed Queue 1­99 [10] Port Timeout in Seconds 5­60 [5] Polling Interval [15] For more information on these options, see the Configuration Guide. [. . . ] Conversely, if you request the punch or staple on the top, the printed job has the punch or staple on the left. Duplex positions are not correct on Custom page size jobs that are printed landscape. For example, if you print a job as Duplex Left, it is instead printed as Duplex Top, and vice versa. Page 4 Printer driver Lock Job and Account Number Jobs If you use the PostScript printer drivers from Windows XP or Windows NT 4. 0, you cannot print Locked jobs or Account Number jobs. FLS2 paper size is displayed as Folio In the printer driver for Mac OS X on US and UK English, the FLS2 paper size is displayed as Folio. Some driver features are not available on French Mac OS X computers The following features do not appear: Group Name, Group Password, Notes, Instructions, Lock Job Password text field, Account Number text field, and Distribution Number Stamping beginning number text field. Custom Page Size does not print correctly on Mac OS X computers Sometimes a custom page size job is printed as Letter size. Layout of PCL 6-up is different from PS 6-up The layout for 6-up printing in the PCL printer driver is different from the layout for 6-up printing in the PostScript printer driver. Default settings for the Windows XP PostScript printer driver (European English) To view the default settings of the Windows XP printer driver, click the Fiery Printing tab in the printer driver and select Default Settings from the Saved Settings menu. Mac OS X printer drivers Mac OS X printer drivers have three fewer print options than the Windows printer drivers. under Print Distribution Number>Distribution Starting Number 1-999, User ID>Password, and Account Number. Printing from Mac OS X (French, Italian, German, Spanish) When you print a job with all print options set as the defaults, the copier/printer displays the message "Load letter 2 in tray 1. " Default paper size in Windows NT 4. 0/2000/Me/XP and Mac OS (European English) The default paper size in the Windows NT 4. 0/2000/Me/XP and Mac OS printer drivers is "Letter. " Before printing, change it to "A4". Booklet When you install a PostScript printer driver on Windows NT/2000/XP, and check the Booklet print option on, Tabloid and Executive page sizes are listed in the driver. Do not choose either of these page sizes. If you do choose one of these page sizes when you set the Booklet print option on, you may receive a conflict message. Cancel the message and choose another page size. Custom paper size names The Windows 98 PCL printer driver does not allow you to edit the custom paper size name. All custom paper sizes in this driver are named Custom. Page 5 Speed is displayed as 31ppm even though 21ppm is installed If you install the PostScript driver on a Windows XP computer and set up the printer driver as the 21ppm color engine, the speed is later listed on the General tab incorrectly as 31ppm. Installable option appears as installed when canceled If you add an installable option in the Configuration tab of the Windows 2000 PCL printer driver and click Cancel, the installable option continues to appear as installed. To remove the installed option, click Remove, click Apply, and then click OK. Cannot use Two-Way Communication to update Windows NT 4. 0 printer driver Although you log in with the correct admin user name (efi_admin_efi), the Two-Way Communication does not update the Windows NT 4. 0 printer driver with the correct Installable Options. To have the printer driver accurately reflect the options installed on the copier/printer, right-click the printer icon, select Document Defaults>Fiery Printing, and click the illustration of the copier/printer. Click OK, and the options that are installed on the copier/printer are correctly listed. [. . . ] To correct this, set the correct date on the Fiery X3e. Applications Microsoft Office When sending a job from Microsoft Office, do not check Collate within the application. Checking Collate changes the font and font size in the second printed copy. N-up printing with multiple copies--If you print multiple copies of an N-up PostScript print job from Office XP, a borderline prints on the blank pages of the print job. N-up printing via IPP--Office XP does not support printing N-up PostScript jobs via IPP. Image clipping--If the document margins are too small in a Microsoft Office application, and you apply the Scaling option, the printed image might appear clipped. Microsoft Word Unwanted lines print a semi-transparent background in Microsoft Word jobs. [. . . ]