User manual KONICA MINOLTA SD-506

[. . . ] bizhub PRO 1050/1050e/1050P/1050eP Additional Information The following options are newly provided to bizhub PRO 1050/1050e/1050P/1050eP. Large Capacity Stacker LS-505 Folding Unit FD-503 Saddle Stitcher SD-506 Perfect Binder PB-502 Please refer to this guide for the operation and safety information on the above options, and keep it inside the user's guide of copier so that it is readily available for reference. Contents 1050/1050e Installation Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1050P/1050eP Installation Space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Machine Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Standard/Optional Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Large Capacity Stacker LS-505 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Folding Unit FD-503. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Saddle Stitcher SD-506 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Output Application Screen appears. 40 Using Saddle Stitcher SD-506 (continued) 2. Touch Fold&Staple, then select to use Trimming or not. The Fold&Staple Screen will be displayed. Touch Trimming or Non Trimming to select it. 3. Touch OK. The Output Application Screen will be restored. If you touch Cancel, the previous setting will be restored. Touching Function Off will deselect the Fold&Staple (and Trimming) mode, however, the specified setting will be kept in memory. 4. Touch OK on the Output Application Screen. The output icon of the selected output mode will be displayed on the Copy Screen. Booklet function in the Application setting has been selected automatically. 41 Using Saddle Stitcher SD-506 (continued) 5. Withdraw the Saddle stitcher tray. Open the tray stand when fully withdrawn. The folded and stapled (and trimmed) sets will be delivered into the Saddle stitcher tray. If the tray is not fully withdrawn, the machine will detect that the tray is filled up, even with less number of finished sets than that specified in specifications. Never return the Saddle stitcher tray to its original position with the tray stand opened. 42 Using Saddle Stitcher SD-506 (continued) Folding Copied Set (1050/1050e only) Machine with the Saddle Stitcher SD-506 installed provides Multi Center mode to double-fold up to 5 sheets of copied set, or Multi Letter mode to fold it inside in three. Using Multi Letter, the print side can be specified on the screen. Specifications for Multi Center / Multi Letter Using Multi Half Fold mode, the finished sets will be delivered to the saddle stitcher tray. Using Multi Tri-Fold mode, the finished sets will be delivered to the multi-folding mode tray. Multi Center + Non Trimming Multi Center + Trimminng Multi Letter + Inside Print Multi Letter + Outside Print 1. Touch Output Application on the Copy Screen. The Output Application Screen appears. 43 Using Saddle Stitcher SD-506 (continued) 2. Touch Multi Center or Multi Letter to select it. If Multi Center is selected, the Multi Center Screen will be displayed to specify whether or not to trim the edge of the folded sheets. Touch Trimming or Non Trimming to select it. The Output Application Screen will be restored. If Multi Letter is selected, the Multi Letter Screen will be displayed to specify the print side. Touch Outside Print or Inside Print to select it. The Output Application Screen will be restored. If you touch Cancel, the previous setting will be restored. Touching Function Off will deselect the mode, however, the specified setting will be kept in memory. 3. Touch OK on the Output Application Screen. The output icon of the selected output mode will be displayed on the Copy Screen. With Multi Center selected, Booklet function in the Application setting has been selected automatically. 44 Using Saddle Stitcher SD-506 (continued) 4. If Multi Center is selected, withdraw the Saddle stitcher tray. Open the tray stand when fully withdrawn. · The double-folded sets will be delivered into the Saddle stitcher tray. If the tray is not fully withdrawn, the machine will detect that the tray is filled up, even with less number of finished sets than that specified in specifications. · The triple-folded sets will be delivered into the Multi-folding tray. Never return the Saddle stitcher tray to its original position with the tray stand opened. 45 Using Perfect Binder PB-502 The machine with the optional Perfect Binder PB-502 installed automatically attaches a copied set with a cover sheet to make a perfect-bound book, applying a dab of glue in the center line of the cover sheet to fix the spine. In the Perfect Binding mode, both simplex and duplex copying are available for the body set, and also the cover sheet can be blank, simplex-printed or duplex-printed, and even trimmed to match with the thickness of the body set to cover. [. . . ] Be sure to confirm that the machine has stopped its operation before withdrawing the dust box. 76 Empty Punch Trash/Trim Dust (continued) 2. Open the top cover of the dust box. 3. Take waste paper out of the dust box. 4. Close the top cover of the dust box, then return it to its original position. Be sure to return the dust box to its original position, otherwise the trimming function cannot be performed. 77 Empty Punch Trash/Trim Dust (continued) Empty Dust Box of Perfect Binder PB-502 When the dust box of the Perfect Binder PB-502 becomes full, the Trim Dust indicator lights in red in the option status area of the Machine Status Screen. If printing job is in progress, a message will be displayed on the Copy Screen. Follow the procedure below to empty the dust box. 1. Open the front door of the perfect binder. Do not open the front door while machine operation is in progress, otherwise a paper jam may be caused. Be sure to confirm that the machine has stopped its operation before opening the front door. 78 Empty Punch Trash/Trim Dust (continued) 2. Withdraw the dust box. 3. Take waste paper out of the dust box. 4. Return the dust box to its original position, then close the front door of the perfect binder. 79 Specifications Large Capacity Stacker LS-505 Name: Function: Paper types: Paper sizes: LS-505 Stack printed paper Stacker: 13 to 64 lb Bond Secondary (sub) tray: 13 to 81 lb Bond Stacker: 12" × 18 w, 11" × 17" w, 8. 5" × 14" w, 8. 5" × 11" w/v, A3 w, B4 w, A4 w/v, B5 v, A5 v, Foolscap, 8K w, 16K v, Wide Size and custom sizes (max. 13. 03" × 19. 21" (331 mm × 488 mm) to min. [. . . ]