User manual KONICA DEVICE SET-UP

[. . . ] Device Set-Up User's Guide Contents 1 Getting Started 1. 1 1. 2 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Overview of Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 2 Software Installation 2. 1 2. 2 2. 3 bizhub OpenAPI settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The devices are registered. 2 Note It sometimes takes more than two minutes before the device registered is displayed in the Device list on the main window. When the device cannot be searched: There is a possibility that this is not set as "Exceptions program" while in the setting of the firewall. Set this application as "Exceptions program" while in the setting of the firewall for the network setting of the PC. Device Set-Up 4-3 Device Registration Registration with the IP address specified 4 1 Start the Device Set-Up to display main window. ­ For details of the method for displaying the main window, refer to page 3-1. . 2 Click 3 Click [Add]. Device Set-Up 4-4 Device Registration 4 4 Enter the IP address in [Device address] text box and click [OK]. 5 Check the contents in Edit device information window and click [OK]. 6 Click [Close]. The devices are registered. 2 Note It sometimes takes more than two minutes before the device registered is displayed in the Device list on the main window. Device Set-Up 4-5 Device Registration Registration from the Function access restriction file 4 It is possible to register a supported device from the Function access restriction file that has been written in advance. For details of the creation of the Function access restriction file, refer to page 5-11. 1 Start the Device Set-Up to display main window. ­ For details of the method for displaying the main window, refer to page 3-1. . 2 Click 3 Click [Register from function access restriction file]. 4 Device Set-Up Select "Function access restriction file" and click [Open]. 4-6 Device Registration 4 5 Enter the decryption password and click [OK]. 6 7 8 When the release confirmation screen of the access restriction is displayed, click [Yes]. Select device to import by clicking [Select] and click [Next]. Device Set-Up 4-7 Device Registration 4 9 Click [Import]. 10 Click [OK]. The devices are registered. 2 Note It sometimes takes more than two minutes before the device registered is displayed in the Device list on the main window. Device Set-Up 4-8 Device Registration Registration of the local file 4 The setting information created in the local file is registered with no connection made to the device. 0 When registering a local file, the PageScope Data Administrator is required to have been installed in advance. 1 Start the Device Set-Up to display main window. ­ For details of the method for displaying the main window, refer to page 3-1. 2 Click [Application initial setting] tab and select [Register a Local file]. 3 Click [New]. Device Set-Up 4-9 Device Registration ­ When reading a backup file, select [Import from the backup file], click [Browse] and then specify the backup file. 4 4 5 Click [OK]. Enter all informations and click [OK]. 6 When a device is selected that requires option setting, specify option setting and click [OK]. 7 When the confirmation message is displayed, click [OK]. The devices are registered. Device Set-Up 4-10 Device Registration 4 2 Note It sometimes takes more than two minutes before the device registered is displayed in the Device list on the main window. Set the search range 1 Start the Device Set-Up to display main window. ­ For details of the method for displaying the main window, refer to page 3-1. . 2 Click 3 Click [Search and Register]. Device Search Result list appears. Device Set-Up 4-11 Device Registration 4 4 Click [Search settings]. ­ Details settings: For a device search, specify the priority in registering the device address. The priority thus specified here is applicable when the device address is updated in [Update Device Address]. 5 Click [Add]. ­ ­ When a change is made to the search settings that have been registered, click [Edit]. When deleting the search settings that have been registered, click [Delete]. Device Set-Up 4-12 Device Registration 4 6 Select search method and click [OK]. 7 After setting the IP address, subnet mask, port No. and SNMP V1/V2/ V3 of the search range, click [OK]. 8 Select the search settings to be added and click [Close]. ­ ­ The search settings are set. When a search is made with the search settings that have been set, click [Re-search]. Device Set-Up 4-13 Device Registration Edit of the device registered 4 1 Start the Device Set-Up to display main window. [. . . ] ­ For details of the method for displaying the main window, refer to page 3-1. 2 3 4 Select [LDAP server settings] from the [Tool] menu. Select access settings to edit from the list, and click [Edit]. Edit LDAP Server Access Settings, and click [OK]. The LDAP server access settings are edited. ! Detail Refer to p. [. . . ]