User manual KONICA MS7000 MKII

[. . . ] MS7000 MKII User's Guide Energy Star® As an ENERGY STAR® Partner, we have determined that this machine meets the ENERGY STAR® Guidelines for energy efficiency. What is an ENERGY STAR® Product? An ENERGY STAR® product has a special feature that allows it to automatically switch to a "low-power mode" after a period of inactivity. An ENERGY STAR® product uses energy more efficiently, saves you money on utility bills and helps protect the environment. Only the setting of "Auto Power Save (15 min. )" complies with the Energy Star standard. P-1 SAFETY INFORMATION This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual. [. . . ] * This function is only available on the PR mode. 14 Start Key Press to make a print (scan) of the image shown on the Screen. 15 Indicators Misfeed/Call-Tech. -Rep. Indicator: Lights up when a paper misfeed or malfunction occurs in the system. Wait Indicator: Lights up when the Scanner is initializing. Lights up when the Printer is warming up. Closure Failure Indicator: Lights up if the Printer cover is open. Add Toner Indicator: Blinks when the Imaging Cartridge of the Printer is running out of toner and lights up when the cartridge has completely run out of toner. Add Paper Indicator: Lights up when the Printer is not loaded with the paper size selected for use, or when either the Paper Feeding Tray or Paper Cassette has run out of paper with Auto (auto paper selection) selected. 3-8 3 Control Panel 1 (Shift Function) Scanner 1 2 3 4 5 6 1 Job Recall Key When this key is pressed together with the Shift Key, the program registration locations (1J, 2J and 3J) are called. Each time this key is pressed while the Shift Key is held down, the display is switched in order of 1J 2J 3J. 2 Resolution Key When this key is pressed together with the Shift Key, the resolution of the Scanner is set. When the Scanner is connected to the Printer: 4H and 6H When the Scanner is connected to the PC: 2H, 3H, 4H, 6H and 8H * 4H represents 400dpi and 6H represents 600dpi. 3 User Mode Key Pressing this key together with the Shift Key enters the unit into the User Mode. 5-4 User Mode. 4 Zoom Key When this key is pressed together with the Shift Key, the electrical zoom magnification is set. Zoom+: When this key is pressed together with the Shift Key, the magnification is increased by an increment of 0. 01X (up to 2. 00X). Zoom clr: When this key is held down together with the Shift Key for one second, the standard magnification is resumed. Zoom-: When this key is pressed together with the Shift Key, the magnification is decreased by a decrement of 0. 01X (down to 0. 50X). 5 PC/PR Key When this key is pressed together with the Shift Key, the connection to the PC or to the Printer is selected. 6 Shift Key Executes an expansion function when being pressed together with the intended function key. 3-9 Scanner Control Panel 2 Centering Fit Masking Auto Masking Auto Skew Correction Focus AF 3 1 2 3 4 5 6 1 Centering/Fit Key When this key is pressed, the setting rotates from OFF to the Centering and Fit functions. Auto Masking* is automatically enabled when the Centering function is selected. * Auto Masking is not enabled if Trimming is selected. Centering: The system centers all masked images onto the printed page. Fit: The system enlarges the image on the screen to fill the page when printed. Enlargement is only to the full length or width of the paper, whichever is achieved first. Centering and Fit are not disabled when Auto Masking is selected. 2 Masking Key When pressed, this key rotates from OFF to the Trimming or Masking functions if the system is equipped with an optional Manual Masking Kit. Masking: Trimming: Prints only the image outside of the area that is defined on the Screen. Prints only the area of the image that is defined on the Screen. · If Trimming is selected from the OFF state, the previously entered settings for Centering/Fit and Manual Masking are applied. · From Trimming, when Masking is selected, the Centering/Fit setting is disabled and the previous settings for the Masking area are applied. · The manual masking area will be cancelled whenever OFF is selected from the Masking state. * Neither Trimming nor Masking are available through the Auto Masking function. 3-10 3 3 Scanner Auto Masking Key This key is used to turn the Auto Masking function ON or OFF. [. . . ] Applies the following functions as required: Contrast Emphasis: applied when film contains text that is poorly contrasted against its background making it difficult to read. Outline Emphasis: applied when film contains blurred black and white images. Determines whether or not to retain the original (uncorrected) skew of a screen image after the print has been made. When two scanners are connected to one printer, this function leaves an identification marker on the print so that the scanner used for the job can be determined after printing. [. . . ]