User manual KONICA SR-IC PLUS BROCHURE

[. . . ] Large amounts data can be quickly downloaded to the software via a special cable supporting USB 1. 1. Data for a whole night (8 hours) can be downloaded in only 10 seconds. PULSO X®-300i Long battery life: 30-hour continuous operation with a single AAA alkaline battery! Remaining battery life is shown by a three-level status indicator. No need to worry about the battery failing overnight. [. . . ] No need to worry about the battery failing overnight. Battery compartment The DS-5 optional data analysis software allows Auto Power Off time to be set. The non-volatile memory reliably retains data during battery replacement. PULSO X®-300i Impact-resistant body designed for a perfect fit on the wrist! The main unit was designed using advanced 3D CAD to achieve double impact resistance versus Konica Minolta's conventional PULSOX-3 model. The main unit weighs only 56g including the battery, and its thin profile measures only 15mm at the centre. The contact surface is contoured for significantly improved stability even when the wearer moves. The large LCD with backlight allows easy reading of the displayed data. PULSO X®-300i New Data Analysis Software DS-5 offers a variety of analysis functions with easy operation! (optional accessory) * The data analysis functions of the PULSOX-300i are available only with the DS-5 software. The DS-5 software can also be used with the PULSOX-3 memory-type model. Interactive communication between the main unit and DS-5 software The clock data in the PC can be used to set the clock in the main unit with one-touch operation. *1) Monitor : 1024 x 768 (SVGA) or more Other : One optical drive *2 (required for installation) One USB port or serial port *3 Printer supporting one of the following OS (When printing is required) *1: Installing this software requires 40 MB of free space on the drive where the Windows system has been installed. The amount of free space required depends on the amount of data to be stored. To install the software in a location other than the current drive, you need to reserve the required free space on the destination drive. *2: An optical drive means a drive supporting CD-ROM media, such as a CD-ROM drive, a DVD-ROM drive, or a DVD-R drive. *3: The PULSOX-300i requires a USB port supporting USB 1. 1 or higher. The PULSOX-3i Series requires an RS-232C serial port. · Applicable OS Windows®XP Pro(SP2), Windows®XP Home(SP2), Windows®2000 Pro(SP4), Windows®98SE *Windows®XP Pro64(Professional x64 Edition) is not supported. · Specifications are subject to change without notice. SAFETY PRECAUTIONS For correct use and for your safety, be sure to read the instruction manual before using the instrument. · Be sure to use the specified batteries. [. . . ] *3: The PULSOX-300i requires a USB port supporting USB 1. 1 or higher. The PULSOX-3i Series requires an RS-232C serial port. · Applicable OS Windows®XP Pro(SP2), Windows®XP Home(SP2), Windows®2000 Pro(SP4), Windows®98SE *Windows®XP Pro64(Professional x64 Edition) is not supported. · Specifications are subject to change without notice. SAFETY PRECAUTIONS For correct use and for your safety, be sure to read the instruction manual before using the instrument. · Be sure to use the specified batteries. [. . . ]