User manual KORG 01W

[. . . ] 15 When using the software for the first time . 18 Selecting programs, combinations, and songs . 20 Selecting a parameter and editing the value . 20 Selecting and executing utility functions . [. . . ] Depending on the version of your Mac's operating system, a confirmation dialog box may appear at this point. If so, enter your password and click [OK]. When the installation has been successfully completed, click [Restart] to exit the installer. Note: Under Mac OS X, the plug-in version will also be installed in the appropriate folder. 5 Setup Setting up the 01W Editor If you want to use the 01W Editor with the 01W connected to your computer via USB, you must make sure that you have finished installing and setting-up the KORG USB-MIDI Driver before you start up the 01W Editor. 1 2 Use a USB cable to connect the 01W's USB B connector to the USB port of your computer. In the 01W's Global mode, make sure that MIDI Filter "Enable Exclusive" is on (the check box should be checked). (The factory setting is on. ) 3 Start up the 01W Editor and verify that it's operating correctly. Windows XP Starting up the 01W Editor Navigate to the "KORG" folder -> "01W" folder, and double-click the "01W Editor. exe" icon. The "KORG" folder is in the location you selected during installation. By default it's in the "Program Files" folder. Alternatively, you can start up the editor by clicking the taskbar [Start] button -> [All Programs] and then pointing to "KORG"-"01W"-"01W Editor. " Mac OS X Starting up the 01W Editor Navigate to the "Applications" folder - "KORG" folder - "01W" folder, and doubleclick the "01W Editor" icon. 6 Setting up the 01W Plug-In Editor If you want to use the 01W Plug-In Editor with the 01W connected to your computer via USB, you must make sure that you have finished installing and setting-up the KORG USB-MIDI Driver before you start up the 01W Editor. This section explains how to set up the 01W Plug-In Editor in your host application and make settings so that it will operate correctly. Make settings as appropriate for your system and setup. About the 01W Plug-In Editor The 01W Plug-In Editor sends and receives only parameter data to and from the 01W. Unlike typical plug-in instruments, the 01W Plug-In Editor does not produce an audio signal. To shorten the startup time, you can make settings so that this data file is loaded automatically when 01W Editor starts up, so that you won't need to read the data from the 01W. Refer to p. 27 "Software Setup (Initial settings for 01W Editor). " 15 Items in the screen A screen like the following will appear when you start up the editor. (This illustration here shows the Combination mode screen. ) Program (Combination/Song) Number, Name Control Assign Control Surface Mode/Browser/Utility KARMA/ Drum Track Edit Pages Tabs Keyboard Mode (COMBI, PROG, SEQ, GLOBAL)/Browser (BROWSE)/Utility (UTILITY): Here you can select program, combination, sequencer, or global mode. The browser will display the names of the programs, combinations, and songs that are in the 01W. UTILITY lets you view and execute the utility commands that are available for the page you've selected. This is where you write (save) data. Program (Combination/Song) Number, Name: This area shows the number and name of the program, combination, or song. Use the up/ down arrows at the right side to change programs, combinations, or songs. Edit Pages, Tabs: Use these to select the page that you want to edit. Control Assign: Here you can change the function of the eight control surface sliders and switches. Control Surface: Here you can control the tone, volume, or KARMA settings depending on the currently selected control assign functions. KARMA/Drum Track: Here you can make settings for the KARMA function and the drum track, and select the KARMA module and scene that will be controlled from the control surface when the control assign setting is KARMA. 16 Keyboard: This section consists of an 88-note keyboard, a pitch bend wheel, and a modulation wheel. You can click the keyboard to play notes, and even play a glissando by dragging over the keyboard to the left or right. Operate the pitch bend wheel and modulation wheel by dragging them upward or downward. 17 Operating procedure Selecting a mode · Click the button to select the corresponding mode. COMBI: Select, play, and edit combinations. SEQ: Select, play, and edit sequencer songs. [. . . ] KARMA In the 01W Editor window, you can perform essentially all editing operations that can be performed on the 01W itself, including turning the KARMA function on/off, scene changes, editing the realtime parameters, and editing the GE parameters. 3 Drum Track The Drum Track is a pattern sequencer dedicated to playing drum patterns. You can use it in any mode: Program, Combination, or Sequencer. In 01W Editor you can turn the drum performance on/off, select drum patterns, select drum programs, and edit the settings of the assigned timbre ­ all in realtime. 23 4 RADIAS (when the EXB-RADIAS is installed) If the EXB-RADIAS option is installed in the 01W, you'll be able to edit RADIAS programs using 01W Editor. Bank INT-F is dedicated to RADIAS programs. [. . . ]