User manual KORG BEATLAB BTL-1

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] On the BEATLAB BTL-1 you can use up to eight insert effects simultaneously. Insert effects cannot be used if "DigiIn" has been turned "On" in the [INPUT/OUTPUT/SOLO] "Ch1­6" or "Ch7­12" tab page. MODELING COUNTER 5. Factory Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Returns the selected modeling effect to the factory settings. 1 2 3 4 2 3 CD 1. Exit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Returns to the Modeling 1 screen. 1. [In(Input), Trk(PlayTrack)] Selects whether the insert effect will be applied to the analog input or to a playback track. In (Input): Select this when you want to apply an effect to the analog input from an [INPUT 1/GUITAR IN]­ [INPUT 4] jack. Trk (PlayTrack): Select this when you want to apply an effect to a playback track. TUNER 2. DRIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [001. . . 100] Adjusts the depth of distortion. · Turn the knob located below "DRIVE" to adjust the setting. · You can also adjust the setting by moving the cursor to "DRIVE" and turning the [VALUE] dial. 4. InsertTo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selects the location at which the insert effect will be inserted. Press the " " button to open the dialog box, and make settings. Press the [YES/OK] key to execute the settings. If you press the [NO/CANCEL] key, the settings will be cancelled. The insertion location setting of the lowest-numbered effect will take priority. For example if you set effect number 1 to the same setting that was already made for effect number 4, the setting for effect number 4 will be cancelled. A setting that has already been made for effect number 1 cannot be selected for another effect number. For channels that are paired, the odd-numbered knob or fader will control both channels. Moving the even-numbered knob or fader will not control anything. 4a. Select ChannelPair . . . . . . . . . . . . . . . . . . . . . [1 2. . . 5 6] To specify the channels you want to pair, press a "1 2"­ "5 6" button to turn it on. [Eq, Send, Aux, Pan] Select the function(s) for which pairing will be enabled. [. . . ] 8, 32 Rhythm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 95, 98 Adjusting the rhythm volume. . 48 Rhythm on/off. . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Setting the tempo and time signature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]