User manual KORG D1200

[. . . ] E 3 Precautions Location Using the unit in the following locations can result in a malfunction. · In direct sunlight · Locations of extreme temperature or humidity · Excessively dusty or dirty locations · Locations of excessive vibration · Close to magnetic fields THE FCC REGULATION WARNING (for U. S. A. ) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] [01. . . 80] Adjusts the level at which noise reduction is applied. · Turn the knob located below "CABINET" to adjust the setting. · You can also adjust the setting by moving the cursor to "CABINET" and turning the [VALUE] dial. 1in2outx2 or 1in1outx2: Select this when you want to use two mono-in/stereo-out effects. This is ideal when you want to add spaciousness to a lead guitar or vocal. The effects can also be used as 1-in/ 1-out monaural effects. You cannot select this if "Assign" is set to "Trk. " 2in2outx2: Select this when you want to use two stereoin/stereo-out effects. This is ideal for use with stereo input sources such as keyboard. 1in1outx4: Select this when you want to use four monoin/mono-out effects. This is ideal for sources with a fixed pan position, such as rhythm guitar. 1in1outx8: Select this when you want to use eight mono-in/mono-out effects. This is ideal for sources with a fixed pan position, such as drums. You cannot select this if "Assign" is set to "In. " 85 UNDO METER/ TRACK VIEW SCRUB TRIGGER LOOP AUTO PUNCH SCENE MARK IN/LOC1, . . . END/LOC4 SONG Adjusts the volume of the effect. · Turn the knob located below "TONE" to adjust the setting. · You can also adjust the setting by moving the cursor to "TONE" and turning the [VALUE] dial. Selects the structure of the insert effects. The available effect programs will depend on this setting. For the effects that are available with each structure, refer to "Effect Program List" (p. 154). TRACK SYSTEM/ USB 3. LEVEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SelectEffType . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [1in2outx2, 2in2outx2, 1in1outx4, 1in1outx8] INPUT/ OUTPUT/ SOLO RHYTHM BOUNCE FINAL EFFECT 1 4 MASTER EFFECT/ AUX SEND If you want to make more detailed adjustments, move the cursor to "DRIVE, " "TONE, " or "CABINET, " and press the [ENTER] key. As an example, here are the settings that will appear if you select "DRIVE. " InsAss: Specify the insert location and type of the insert effects EQ INSERT EFFECT Modeling 2 3. InsertTo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selects the location at which the insert effect will be inserted. [. . . ] 48 Rhythm pattern. . . . . . . . . . . . . . . . . . . . . . . . . . 48, 95 S S/P DIF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Sampling rate converter . . . . . . . . . . . . . . . . . 77 Scene Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]