User manual KORG EXP2

[. . . ] Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. [. . . ] Use the [-] [+] keys to select the desired setting. This is noise caused by signal leakage from the tone wheel, and is a characteristic part of the sound of a tone wheel organ. Press the [ ] key once to access the “DB ® LevelCurve” parameterand use the [-] [+] keys to , adjust the setting. Bright produces a brighter sound as you play higher on the keyboard, and Mellow produces a more mellow sound in the upper octaves. Press the [ ] key once to access the “Over ® Tone Level” parameter and use the [-] [+] keys to adjust , the setting. This parameter adjusts the overtone level of the tone wheel. Higher settings will produce a greater amount of overtones. Press the [ ] key once to access the “Leakage ® Level” parameter and use the [-] [+] keys to adjust , the setting. Higher settings will increase the volume of the leakage noise. Press the [ ] key once to access the “Noise ® Level” parameter and use the [-] [+] keys to adjust , the setting. This adjusts the noise that will occur regardless of whether notes are being played. The “EX LOWER” parameters will be displayed. Use the [ ][®] keys to select a bar √ . You can make settings for the three bars 16', 8', and 4'. 16' 8' 4' Editing the drawbar parameters When the DRAWBAR SELECT section [DRAWBAR PRESET] key is pressed, the drawbars will sound at the levels saved with the current program. These settings are saved individually for each program. 5. Use the [-][+] keys to adjust the value. The display will show the value as you adjust it. Press the [WRITE/ENTER] key to write the settings into internal memoryFor details, refer to “W . riting a program” (p. 20). Normal mode If the [DRAWBAR PRESET] key is pressed in both upper and lower DRAWBAR SELECT sections, the “UPPER” parameters will be used when you play the upper keyboard, and the “LOWER” parameters will be used when you play the lower keyboard. If you want to edit these settings, use the following procedure. The left side of the display will indicate UPPER, and to the right of this the “UPPER” parameter settings will be displayed. Copying drawbar parameters The front panel Drawbar 1 or Drawbar 2 settings can be copied directly to the “UPPER” or “LOWER” parameters of a Normal program, or to the “EX Drawbar Level” parameters of an EX program. As an example, here's how you can select a Normal program, use the front panel Drawbar 1 bars to create a sound, and then copy the settings to the “UPPER” parameters of the program. [. . . ] 9, 10 Reverb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 20, Rotary Effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 19, S Shortcut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Split . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 14, Swap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 23, T Transpose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]