User manual KORG MAXI-800-DV SCHEMATIC

[. . . ] You may also set the switch to DC to use the optional 9V power supply. The MAXI-800-DV-Series will not power up when set to USB unless the computer is on! Note: 2. 3. Connect the USB cable to your computer. [. . . ] MAXI-800-DV61P only: Connect a pair of audio cables from the rear panel L/R outputs to your stereo monitoring system, or plug stereo headphones to the HEADPHONES jack on the rear panel. Driver setup and editor installation Refer to pages 7-10 in the MAXI-800-DV-Series Owners Manual for driver installation for your particular computer. The MAXI-800-DV-Series Editor and M1Le software synthesizer can also be installed using similar steps. Working with the MAXI-800-DV-Series Controllers Open the M1Le software to begin having fun with your MAXI-800-DV-Series controller. Also, open the MAXI-800-DVSeries Editor. Note: Not so fast!If this is your first time running either software title, you will have to configure the appropriate Audio and MIDI device settings. For more on this, please reference page 2 of your MAXI-800-DVSeries Editor Manual and M1 Le Stand Alone Setup Guide. 1. 2. With either software selected, try moving the ClickPoint control- it should default to operating as your computer's mouse!> If it does not, select the MAXI-800-DV-Series editor, and click on the drop-down arrow above the ClickPoint graphic > Select MOUSE instead of CC as the choice, and click on TRANSMIT. (MOD WHEEL defaults to transmitting CC#1) Plug in an optional momentary pedal, and it will default to the DAMPER function (CC#64) > DAMPER can be re-assigned to any controller number, function as a MOMENTARY or TOGGLE switch, or transmit separate ON and OFF values. Working with the MAXI-800-DV61P The MAXI-800-DV61P is unique ­ a USB MIDI controller that also can play great internal keyboard sounds. This makes it perfect for going from your computer home studio to gigs and rehearsals. Plus, when used with your computer it provides these essential sounds without making any "demands" on your CPU. 1. 2. Press the Bank key to select one of the three banks of eight sounds > Press one of the eight program keys to select a sound. Press the REVERB or CHORUS keys to add effects to the internal sounds. There are three levels of each effect, and the keys are color-coded to indicate the effect depth: Unlit = Off Green = Light effect Orange = Standard effect Red = Deep effect 3. To transpose the keyboard, hold down the BANMAXI-800-DV key until it flashes > Press the PIANO 2 key: it will flash > Play the desired key between C3 and C5 > Press the BANMAXI-800-DV key to exit >To return the keyboard to C=C, repeat this step and press the note C4. There are additional settings that can be made to affect the overall functionality of the MAXI-800-DV61P, such as velocity curve, Local ON/OFF, temperament, etc. [. . . ] Press the REVERB or CHORUS keys to add effects to the internal sounds. There are three levels of each effect, and the keys are color-coded to indicate the effect depth: Unlit = Off Green = Light effect Orange = Standard effect Red = Deep effect 3. To transpose the keyboard, hold down the BANMAXI-800-DV key until it flashes > Press the PIANO 2 key: it will flash > Play the desired key between C3 and C5 > Press the BANMAXI-800-DV key to exit >To return the keyboard to C=C, repeat this step and press the note C4. There are additional settings that can be made to affect the overall functionality of the MAXI-800-DV61P, such as velocity curve, Local ON/OFF, temperament, etc. [. . . ]