User manual KORG MINI POPS 120

[. . . ] Also, CE mark which is attached to our company's products of Battery operated apparatus means it conforms to EMC Directive (89/336/EEC) and CE mark Directive (93/68/EEC). Keeping foreign matter out of your equipment Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it could cause a breakdown, fire, or electrical shock. Be careful not to let metal objects get into the equipment. [. . . ] Then contact your nearest Korg dealer or the store where the equipment was purchased. * Company names, product names, and names of formats etc. Are the trademarks or registered trademarks of their respective owners. This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this product should be used. If you have purchased this product via the internet, through mail order, and/or via a telephone sale, you must verify that this product is intended to be used in the country in which you reside. WARNING: Use of this product in any country other than that for which it is intended could be dangerous and could invalidate the manufacturer's or distributor's warranty. Please also retain your receipt as proof of purchase otherwise your product may be disqualified from the manufacturer's or distributor's warranty. For trouble-free enjoyment of the mini-KP's fullest potential, please read this manual carefully and use the mini-KP only as directed. Turning the power on/off Turning the power on Set the ON/STANDBY switch to the ON position; this turns the power on. Turning the power off Set the ON/STANDBY switch to the STANDBY position; this will turn the power off. Each axis (X, Y) will provide realtime control of a different effect parameter. If you press the HOLD button while your finger is on the touch pad, you can take your finger away and the effect will continue to play as if your finger was still on the touch pad, and at the same location as when you pressed the HOLD button. If you want to store the Hold state, press the HOLD button to turn it on. The position at which you last touched the pad will be stored as the held position on the touch pad. Hold down the MEMORY B button and press the TAP button, and then use the PROG/VALUE knob to select "r. Hit the TAP button several times in tempo with your song, and the mini-KP will detect the corresponding BPM value and use it as the current setting. While the BPM value is displayed, you can also adjust the BPM value by turning the PROG/VALUE knob. If you hold down the TAP button for an extended time, the mini-KP will switch from the BPM setting back to program selection. The mini-KP will also return to the program selection state if you haven't performed any setting operation for five seconds. To return to the normal play mode, once again hold down the MEMORY B button and press the TAP button. [. . . ] To return to the normal play mode, once again hold down the MEMORY B button and press the TAP button. The mini-KP will also return to the normal play mode (program selection state) after about three seconds if no additional setting operations are performed. This setting will be remembered even when the power is turned off. With FX RELEASE, the moment you take your hand off the touch pad, a delay effect synchronized to the current BPM will be applied, and will then gradually diminish. [. . . ]