User manual KORG MR-2000S

[. . . ] Owner's Manual E IMPORTANT SAFETY INSTRUCTIONS · · · · · · Read these instructions. Mains powered apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] You can add up to 100 marks, and edit them later. You can set the Mark Mode (p. 30) so that the file will be divided at marked locations during recording. Markers are automatically added at the beginning of the project, and at locations at which you resume recording after you pause recording. If a divided file was created when the data size exceeded 1 GB during recording (p. 35), a mark will also be added automatically at the beginning of the divided location. When you save a project in which marks were added, the mark data will automatically be added to the audio file (WAV, DSDIFF) in the project. You can only add marks to a project that was recorded on the MR-2000S. You can register marks in any position of the WAV, DEF or WSD project, but for the DSF project, only the 11. 6 ms (Fs=2. 8 MHz) or larger size mark can be registered by a unit of 5. 8 ms (Fs=5. 6 MHz). 21 Viewing the mark list Here's how to view the list showing the marks in a project in the order of their time location. Select and confirm the project/file whose marks you want to view. Refer to "Selecting a project/file to edit" on page 17. The project/file edit screen will appear, with the name of the selected file in the top line. Use the dial to select "Mark List" and press the enter button to confirm. The mark list (Mark List) screen will appear. When you've finished viewing the marks, press the exit button to return to the project/file edit screen. Using marks to move 1. Select and confirm a project/file that contains marks. Refer to "Selecting a project/file to edit" on page 17. The project/file edit screen will appear, with the name of the selected file in the top line. Regardless of the screen shown in the display, you can press the rewind or fast-forward button during playback to move to the time location of the previous or next mark. Press once Press once Current position (time) Press once Project Mark Press once Press once Mark Mark Mark Mark Order of times Alternatively, you can use the dial in the Mark List screen to select the desired destination mark, and then press the enter button to move there. When the move is completed, the display will return to the home screen. Editing marks You can edit the time locations of the marks shown on the mark list (Mark List) and delete the unwanted marks. You can only edit marks of a project that the MR-2000S is able to recognize. You can edit the marks even of a project whose Protect setting is on, but they will revert to their unedited state when you select a different project or turn off the power. In the mark list (Mark List) screen, use the dial to select the mark that you want to edit, and press the enter button to confirm. The mark edit select (Mark Edit) screen will appear. [. . . ] · The sampling frequency was changed when synchronized to S/P DIF. · The system file required for "SoftwareUpdate" does not exist, or the length of the file does not match. Check the system file and re-save it. Please contact your local Korg distributor. · You attempted to register more than 100 marks. No further marks can be registered. Delete unneeded marks before registering other marks. [. . . ]