User manual KORG N264

[. . . ] After reading this manual, please keep it for later reference. Keeping foreign matter out of your equipment Never set any container with liquid in it near this equipment. Be careful not to let metal objects get into the equipment. If something does slip into the equipment, unplug the AC adaptor from the wall outlet. [. . . ] You can use the Value dial to select programs quickly. By activating the Key Lock function, you can disable all operations except for selecting programs. This is a convenient way to prevent accidental operation during a live performance. The L/M buttons will select programs, and other buttons and the Value dial will not function. If you want to change the function of the Value dial so that it will adjust the master level, hold down the EXIT button once again and press the button, or turn on the power once again. The Key Lock function will be cancelled when the power is turned off. To enter Rhythm mode, press the RHYTHM button once when in Play mode (except for mute/ bypass or key lock), AUX Pitch mode, or Phrase Trainer mode. When you enter this mode, the Rhythm Pattern selection screen will appear, the selected rhythm will start, and the Rhythm mode icon will light. the indication of the value graph will change according to the pattern or tempo. This mode contains the following four parameters. Use /® to select parameters, and use the Value dial and the TAP button to set the value of each parameter. if you select a long recording time (16 or 32) , the audio quality of the recording will be lower. If the tempo of the rhythm is extremely slow, it will not be possible to record a large number of measures. The recording mode will cycle through the following choices each time you press the PHRASE TRAINER button. AUX Records only the AUX input BASS Records only the bass sound AUX+BAS Records both the AUX input and bass JAM Records the bass together with the rhythm that was last selected in Rhythm mode Use the value dial to select the recording time (for "JAM, " the number of measures). Start playback on your CD or other audio source, and at the point where you wish to begin recording, press the ENTER/REC button. If, after recording, you want to change the recording mode or recording time, press the PHRASE TRAINER button while playback is paused. The recorded content will be lost when the power is turned off. During playback or while paused, you can use the L/M buttons to select programs. If you do not stop recording, recording will continue until the selected recording time has elapsed, and loop playback will begin automatically. Each time you press an /® buttons, you will cycle through the effects in the order shown below. When an effect is selected, its icon will blink. [. . . ] CHORUS1 CHORUS2 TYPE (L/M button) Vintage chorus in which the effect sound is output to the left and the direct sound to the right. A vintage stereo chorus tuned for bass that inverts the phase of the effect sound between left and right, adding spaciousness to the sound. 2 switches from slow to fast when you play strongly. 3 switches from slow to fast when you play softly. [. . . ]