User manual KORG NC500

[. . . ] Owner’s Manual Thank you for purchasing the Korg Digital Piano Concert NC-500/NC-300. Mains powered apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not block any ventilation openings, install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] To start recording, do any of the following: press START/STOP, press PAUSE, hit any key, or step on any pedal. Recording will also start if you press the appropriate SOUND buttons to select another sound. If you use START/STOP to begin recording, the piano gives you a 2measure count-in before starting to record. If you use any of the other methods, the piano starts recording immediately. the piano will also begin recording if it receives a MIDI message (p. 31) on the channel assigned to the part that is standing by to record. When you pause and then resume a recording, you may get a rough transition at the resume point. A good way to avoid this problem is to use the metronome when recording. With the metronome running, press the PAUSE button in sync with the beat at which you want to pause. When you resume, recording will begin again from that beat point. Look at the the PART 1 and PART 2 buttons to see which parts have recorded data. The button is dark if no recorded data is present. The button is lit solid if the part has been recorded. If both parts are recorded but you only want to play one of the parts, press the PART button for the part you do not want to play, so that the button goes dark. The START/STOP button flashes in sync with the tempo as playback proceeds, with a long flash (eighth note) on the first beat in the measure and a shorter flash (sixteenth note) on the remaining beats. 16) to change the tempo while playback is in progress. When you are ready to stop playback, press START/STOP again. Playback stops, and the playback position returns to the first measure. Press START/STOP again to restart the song from the beginning. If you wish to pause the playback, press the PAUSE button (so that the button lights up). to resume playback , press PAUSE again. Playback stops automatically when it reaches the end of the recorded data. [. . . ] Periodically check the assembled stand, and obser ve the f ollowing precautions. Periodicall y c hec k to confirm that no scre ws or fastener s are loose . If the stand seems to shake more than usual, c hec k scre ws and fastener s immediatel y and tighten as necessar y. Connect the pedal cord to the connector on the underside of the pianoConnect the po . [. . . ]