User manual KORG WAVEDRUM MINI

[. . . ] 7 Connecting the clip to the WAVEDRUM Mini . 11 3 Deutsch Table Of Contents Français English Thank you for purchasing the Korg WAVEDRUM Mini dynamic percussion synthesizer. to help you get the most out of your new  instrument ,  please read this manual carefully. THE FCC REGULATION WARNING (for USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] select a rhythm pattern , and play it back. See “Playing back a rhythm pattern. Select the sound that you want to overdub. Press the button to start recording (the indicator will light up). Strike the pad or the object where the clip is attached; your performance will be recorded. Press the button or the button to stop recording. If you press the button, recording will end and playback will continue. If you press the button, recording will end and playback will stop. You can repeat the above steps to overdub your performance as many times as you wish. Note: If you want to erase your recorded performance and re-record, you can use the Undo/Redo function. refer to “Undo and Redo” (See page 13). Note: If you press the button from the stopped condition, playback and recording will start simultaneously. Playing and overdubbing rhythm patterns You can enjoy jamming along with rhythm patterns in a variety of genres. You can also overdub your own performance onto these rhythm patterns. While holding down the SHIFT button, press the button to make the rhythm pattern / looper select indication (located in the upper right of the operating panel) light up. This selects the rhythm pattern function. You can choose from 100 different rhythm patterns. , the pattern of the following number) will be selected. If you hold down the SHIFT button and press the + button, the previous rhythm pattern will be selected. The recorded performance will disappear when you select another rhythm pattern, switch to the Looper function, or turn off the power. Immediately after the power is turned on, the original rhythm pattern 00 will be selected. During playback and recording, the pad sensitivity will automatically be lowered to prevent acoustic feedback. [. . . ] Can't select sounds or effects Could the CLIP or PAD indicators of the buttons on the left of the control panel be blinking?Press one of the CLIP/PAD, , , or + buttons to make the indicator change from blinking to steadily lit. Rhythm pattern doesn't sound • Could the rhythm pattern / looper select indicator (on the upper right side of the panel) be blinking?If it's blinking, the rhythm pattern is muted. [. . . ]