User manual KORG WITUNE

[. . . ] If liquid gets into the equipment, it could cause a breakdown, fire, or electrical shock. Be careful not to let metal objects get into the equipment. cAUTION Risk of Explosion if Battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. [. . . ] (Alkaline batteries recommended) Transmitter Installing batteries Before you install or replace the batteries on your Tuner or Transmitter, be sure to turn off the power to both the transmitter as well as the tuner. The batteries that are included are intended to allow you to check functionality and may have a short life. If the batteries for the Tuner or Transmitter are low on power, the low battery indicator will appear on the LCD display of the Tuner. Both units will continue to work for a while, but tuning may not be accurate. Please replace the batteries with new ones as soon as possible. Reattach the battery cover on the Tuner. please don’t charge an alkaline battery. Installing batteries in the Transmitter CR2032 batteries that are compatible with the Transmitter CR2032 batteries made by Panasonic 5 1. Remove the clip that’s attached to the Transmitter, then gently press down and slide the battery case cover on the near panel of the Transmitter to remove it. Properly orient the battery and insert it into the unit. To remove the clip or strap, hold the Transmitter securely and slide the clip or strap while holding it by its sides. When you attach the clip do not touch the connectors on the Transmitter. Do not pull the clip by grasping the pinching portion of the clip. When you attach the clip or strap, be sure to slide it in all the way until it is locked, then make sure that it’s secure. Reattach the battery cover on the Transmitter. Attaching and removing the supplied clip/strap on the Transmitter Insert the clip or strap into the clip attachment groove on the Transmitter and slide it in all the way. Make sure that you insert the clip or strap in the correct orientation. 6 Attaching the Transmitter to your musical instrument The Wi-Tune measures the pitch of a musical instrument by sensing vibrations from the instrument. These vibrations are picked up by the Transmitter, and wirelessly transmitted to the Tuner. However, depending where the Transmitter is attached to the instrument, the vibrations may not be picked up very well. In this case, try repostioning the Transmitter to pick up these vibrations better. The Transmitter can be attached to musical instruments such as woodwind, brass or strings instruments. [. . . ] You can adjust the reference pitch in 1Hz steps in the range of 410Hz to 480Hz. Play a single note on your musical instrument to tune. The Tuner displays the name of the note closest to the recognized pitch. Tune your instrument so that the Tuner displays the note name that you are turning to. [. . . ]